Thread: [Announce] kernel-power stable v49 in Extras-Testing
View Single Post
freemangordon is offline freemangordon
2011-11-13 , 10:04
Posts: 3,074 | Thanked: 12,964 times | Joined on Mar 2010 @ Sofia,Bulgaria
#1993
Originally Posted by Estel View Post
@freemangordon

Wow, You calculated SR for 900 mhz? That's incredibly great news! As I understand it, the kp49 You linked is the latest, i.e contain not only updated SR, but all changes like 720p recording etc? I'll test it gladly, after doing full backup.

/Estel
It is the whole range 125-900 which is recalculated. I have no idea why, but with stock calibrations voltages were too high, i.e. for 250 SR voltage was about 28-30 while with re-calculated calibrations it stays 21-22. The same for other frequencies. I also changed lowest voltage limit from 20 to 18. That should affect 125MHz, and will (hopefully) have visible effect on battery life if one sets lower frequency to be 125. If someone give me a hint on what is the lowest voltage for 125 (without SR) I can lower that limit further. Also I would like to have others voltages for 250 (manually undervolted) to tweak SR driver further.

And yes, uploaded debs are based on latest KP with only SR driver modified.
 

The Following 5 Users Say Thank You to freemangordon For This Useful Post: