Installed, tried video recording:

[ 149.875091] cam_shutter (GPIO 110) is now open
[ 180.487670] ***** DSPMMU FAULT ***** IRQStatus 0x2
[ 180.487701] ***** DSPMMU FAULT ***** fault_addr 0x11010000
[ 180.487701] bridge_deh_notify: ********** DEVICE EXCEPTION **********
[ 180.487731] bridge_deh_notify: DSP_MMUFAULT,err_info = 0x0
[ 180.487731] bridge_deh_notify: DSP_MMUFAULT, High Address = 0x1101
[ 180.487731] bridge_deh_notify: DSP_MMUFAULT, Low Address = 0x0
[ 180.487762] bridge_deh_notify: DSP_MMUFAULT, fault address = 0x11010000
[ 180.488006] print_dsp_trace_buffer:
[ 180.488006] \ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\0 2\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02 \03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\f f\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\ 03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff \02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\0 3\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\ 02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03 \ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\02\03\ff\0 2\03\ff\02\
[ 180.518707] procwrap_detach: deprecated dspbridge ioctl

At every run.

@freemangordon
Before this, i was using your kp49 build 20120102 (with vdd1 adjustments) and it was running without any issue since the first day.