@freemangordon
....sorry for that but...same crash:

(Pay attention, the kernel profile is always the same used in last month with kp49 20120102. The recording resolution is "16:9 High" stahdard. Packages all updated and all dsp libs updated for 720p)



Linux N9N 2.6.28.10-power49+pre50 #1 PREEMPT Mon Jan 30 04:24:09 EST 2012 armv7l GNU/Linux

cat /sys/power/sr_vdd1_dsp_boost
200

kernel-config show
current kernel configuration:
current frequency: 850
supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150
min. frequency: 125
max. frequency: 850
avoid frequencies:
active frequencies: 125:21,90 250:24,180 500:36,360 550:38,400 600:41,430 720:46,500 805:50,560 850:52,600 900:60,600 950:60,600 1000:60,600 1100:72,600 1150:72,600
SmartReflex VDD1=1, VDD2=1
governor ondemand: ignore nice load= 0, up threshold= 95, sampling rate= 300000, powersave bias= 0

[ 3239.363372] ***** DSPMMU FAULT ***** IRQStatus 0x2
[ 3239.363403] ***** DSPMMU FAULT ***** fault_addr 0x11010008
[ 3239.363433] bridge_deh_notify: ********** DEVICE EXCEPTION **********
[ 3239.363433] bridge_deh_notify: DSP_MMUFAULT,err_info = 0x0
[ 3239.363433] bridge_deh_notify: DSP_MMUFAULT, High Address = 0x1101
[ 3239.363464] bridge_deh_notify: DSP_MMUFAULT, Low Address = 0x8
[ 3239.363464] bridge_deh_notify: DSP_MMUFAULT, fault address = 0x11010008
[ 3239.363586] print_dsp_trace_buffer:
[ 3239.363586]
[ 3239.401641] procwrap_detach: deprecated dspbridge ioctl
[ 3239.530029] proc_stop: Can't stop device, active nodes = 1
[ 3270.135894] cam_shutter (GPIO 110) is now closed