Thread: Usb host mode trouble
View Single Post
fanoush is offline fanoush
2008-01-02 , 08:53
Posts: 2,152 | Thanked: 1,490 times | Joined on Jan 2006 @ Czech Republic
#5
Originally Posted by acidrain View Post
My device works absolutely flawlessly with tons of applications (booting from 2gb mmc) in it except now, when I plug in with the usb cable with the computer it doesnt show up on 770. Reflashing didnt solve the issue.
Perhaps that's because you enabled usb host mode? So after all the title of this thread is reasonable? In that case you can disable it via
Code:
flasher-3.0 --disable-usb-host-mode
You can't use usb storage functionality when 770 is switched to usb host mode.

Originally Posted by acidrain View Post
root@ubuntu:/home/ubuntu/Desktop# ./flasher-3.0 -i
flasher v0.8.7 (Oct 17 2006)
Suitable USB device not found, waiting
USB device found found at bus 001, device address 00
Found device SU-18, hardware revision 1802
NOLO version 0.9.14
Version of 'sw-release': <no version>
Oh, so you no longer have that problem with unsupported board id 0x0000 mentioned in first post? Then disregard all the rest with forcing hw revision, 0xFFFF etc. it i dangerour and you don't need it if flasher works.

Maybe when you see the "unsupported board id" it is because your 770 is fully booted? You know you can't use flasher when the device is fully booted? Flasher only works when device is completely powered off (no charger attached) and then powered on with usb cable attached and flasher waiting. And you should also hold the Home key when you power on the 770 if you are using vmware. With home key pressed on boot 770 waits for flasher indefinitely. VMWare may need it, it is slow with usb device detection.
__________________
Newbies click here before posting. Thanks.

If you really need to PM me with troubleshooting question please consider posting it to the forum instead. It is OK to PM me a link to such post then. Thank you.