Thread: N800 USB 2.0 HUB (direct connect)
View Single Post
xxM5xx's Avatar
xxM5xx is offline xxM5xx
2008-01-03 , 10:53
Posts: 354 | Thanked: 93 times | Joined on Oct 2007 @ New York
#5
Originally Posted by Thmos John View Post
Great Work!
That is exactly what I want for a long time since I bought Nokia N800. Could you tell it in detail how to make this sweet equipment for N800? A circuit diagram will be very helpful.


Thanks!
The circuit wiring is a no brainer. It is described in many places on this site and on the Internet. Basically you tie pins 4 and 5 together on the Mini-B USB plug and wire 1,2,3,4 to the hub's Printed Circuit Board just as it is were a Female A receptacle. The hub gets +5V from a wall wort (see photo above).

EDIT: I got this all working with an external Hard Disk Drive today. See it here:

http://www.internettablettalk.com/fo...6&postcount=18


Also, here is a little pigtail I made: (pins are 1 to 1, 2 to 2, 3 to 3, 4 to 4, with 4 & 5 on the mini-B tied together). It can be used for low power USB peripherals like keyboards and flash memory sticks.



M5
Attached Images
 
Last edited by xxM5xx; 2008-01-03 at 22:50.