Usual Tips on being good to your USB File down you USB cable's hooks. Be gentle with your N900 when using USB: - Don't swing it around (no matter how good the music is) - Don't drop it on the floor. Attachment 22216 NOTE: File is for reference only, any metal file will do -------------------------- Just adding a quick guide of what to do when making the soldered version. When you get to the USB after taking of the MicroSD "off" then clean the area beside it, now use what ever you have to scratch of some of the paint (i used a small screwdriver). just scrape it of like it is drawn in the pictures. Now you should have some exposed copper on each side of the USB, you need to keep the soldering iron on here with solder applied before it "gets a grip" and while you do this hold the iron up against the USB metal, and add solder here to, you need to warm up the USB a little or else the solder will be "cold" soldered and then this fix will be useless because the solder will not really hold on to the USB. As for the cover, try to assemble the mainboard into the cover and see if it lines up with the hole in the cover, you can press a little down over the USB as when the N900 is assembled the screws hold the whole thing down, so again try to see if it fits before you mod the cover, this is the step that can take the most time in this fix. Attachment 22212 Attachment 22213 Attachment 22214 Attachment 22215 -------------------------- Please PM me with the links i don't find, im searching through threads, but you may remember some, or you might have made some.