View Single Post
Posts: 103 | Thanked: 150 times | Joined on Jun 2010 @ Fortaleza @ Brazil
#26
Originally Posted by michaaa62 View Post
I am not succeeding in connecting to the server. I am getting '404 -Not found'. Also localhost on the N900 and 127.0.0.1 on the N900 give the 404 error. This is also what nmap reports after a scan of the N900
Code:
nmap -A -T4 192.168.49.202

Starting Nmap 6.00 ( http://nmap.org ) at 2012-08-12 22:23 CEST
Nmap scan report for 192.168.49.202
Host is up (0.0050s latency).
Not shown: 998 closed ports
PORT     STATE SERVICE VERSION
22/tcp   open  ssh     OpenSSH 5.1p1 Debian 6.maemo5 (protocol 2.0)
| ssh-hostkey: 1024 some key (DSA)
|_2048some key (RSA)
1234/tcp open  http    lighttpd 1.4.26
|_http-title: 404 - Not Found
MAC Address: C0:38:F9:EE:EF:96 (Nokia Danmark A/S)
Device type: general purpose
Running: Linux 2.6.X
OS CPE: cpe:/o:linux:kernel:2.6
OS details: Linux 2.6.9 - 2.6.31
Network Distance: 1 hop
Service Info: OS: Linux; CPE: cpe:/o:linux:kernel

TRACEROUTE
HOP RTT     ADDRESS
1   5.05 ms 192.168.49.202

OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 15.08 seconds
Server is running and smartcontrol started through menu,
Code:
Nokia-N900:~# ps -A | grep lightt
 2232 root      2600 S    lighttpd -f lighttpd.conf
10088 root      2464 S    /usr/sbin/lighttpd -f /etc/lighttpd.conf
12283 root      2644 S    grep lightt
Nokia-N900:~# ps -A | grep smart
10103 user      2640 S    /bin/sh /opt/smartcontrol/bin/start_smartcontrol.sh
13457 root      2644 S    grep smart
the information popup points me tp IP::1234, but only IP:1234 is accepted by the browser to show 404.

Please try to point me to the point, where the setup fails on my device.
To access the webpage, just type IP:1234 and if everything is working properly, you can use the application, else, you will need to be sure if the setup was done sucessfully and if wasn't, just talk to me and we will get a better solution to build a better package to solve these installation problems.
 

The Following User Says Thank You to guisoliver For This Useful Post: