What's your powertop showing now?
wertop Powertop 1.13.3 status: Unknown job: pmtrackerdaemon Sleeping for 11 seconds before sampling Collecting data for 30 seconds Sample interval was 00m 30s 32043us C# | Ratio | Avg/dura | Frequency | Ratio --------+--------+----------+-----------+--------+ C0 | 2.5% | | 600 MHz | 2.0% | C1 | 4.7% | 37.0ms | 550 MHz | 0.0% | C2 | 5.3% | 10.8ms | 500 MHz | 1.6% | C3 | 12.6% | 104.7ms | 250 MHz | 96.4% | C4 | 75.0% | 1609.1ms | IRQ# | Activity | Type | Name --------+------------+----------------+--------------------------- 56 | 449 | INTC | i2c_omap 37 | 186 | INTC | gp 11 | 107 | INTC | prcm 57 | 100 | INTC | i2c_omap 86 | 72 | INTC | mmc1 21 | 41 | INTC | SGX 273 | 36 | GPIO | kb_lock 12 | 13 | INTC | DMA 67 | 2 | INTC | ssi_p1_mpu_irq0 225 | 2 | GPIO | omap2-onenand 25 | 1 | INTC | OMAP 71 | 1 | INTC | ssi_gdd PID# | Activity | Name | Function Entry (Expire) --------+------------+----------------+--------------------------- 0 | 101 | <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer) 0 | 29 | <kernel core> | hrtimer_start (tick_sched_timer) 37 | 25D| awk | cpufreq_governor_dbs (delayed_work_timer_fn) 1359 | 18 | osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup) 584 | 16 | mmcqd | schedule_timeout (process_timeout) 686 | 15 | bme_RX-51 | sys_timer_settime (posix_timer_fn) 820 | 7 | Xorg | hrtimer_start (it_real_fn) 686 | 6 | bme_RX-51 | sys_timer_settime (posix_timer_fn) 686 | 6 | bme_RX-51 | schedule_timeout (process_timeout) 584 | 6 | mmcqd | queue_delayed_work (delayed_work_timer_fn) 820 | 5 | Xorg | queue_delayed_work (delayed_work_timer_fn) 748 | 4 | mce | schedule_hrtimeout_range (hrtimer_wakeup) 657 | 4 | dsme | __enqueue_rt_entity (sched_rt_period_timer) 29 | 3 | mount | setup_wb_timer (wb_timer_fn) 657 | 3 | dsme | do_nanosleep (hrtimer_wakeup) 785 | 3 | sgx_perf | queue_delayed_work (delayed_work_timer_fn) 1 | 2D| <kernel core> | queue_delayed_work (delayed_work_timer_fn) 1316 | 2 | browserd | gpio_sw_irq_handler (gpio_sw_timer) 748 | 2 | mce | queue_delayed_work (delayed_work_timer_fn) 686 | 2 | bme_RX-51 | do_nanosleep (hrtimer_wakeup) 748 | 1 | mce | schedule_timeout (process_timeout) 748 | 1 | mce | schedule_timeout (process_timeout) 1320 | 1 | browser | schedule_timeout (process_timeout) 584 | 1 | mmcqd | schedule_timeout (process_timeout) 1350 | 1 | browserd | futex_wait (hrtimer_wakeup) 14 | 1 | pdflush | ubifs_wbuf_write_nolock (wbuf_timer_callback_nolock) 14 | 1 | pdflush | ubifs_wbuf_write_nolock (wbuf_timer_callback_nolock) 1012 | 1 | signond | schedule_hrtimeout_range (hrtimer_wakeup) 1088 | 1 | trackerd | queue_delayed_work (delayed_work_timer_fn) 1 | 1 | <kernel core> | inet_initpeers (peer_check_expire) 1337 | 1 | browserd | futex_wait (hrtimer_wakeup) 1374 | 1 | powertop | do_nanosleep (hrtimer_wakeup) Power domain activity breakdown Domain | % of time spent in states --------+---------+---------+---------+---------+---------- usbhost |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now:(OFF) sgx |OFF: 96%|RET: 0%|INA: 0%| ON: 3%| now:(OFF) per |OFF: 86%|RET: 5%|INA: 0%| ON: 7%| now:(ON) dss |OFF: 88%|RET: 0%|INA: 0%| ON: 11%| now:(OFF) cam |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now:(OFF) core |OFF: 75%|RET: 8%|INA: 3%| ON: 12%| now:(ON) neon |OFF: 75%|RET: 12%|INA: 5%| ON: 7%| now:(ON) mpu |OFF: 75%|RET: 12%|INA: 5%| ON: 7%| now:(ON) iva2 |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now:(OFF) Clock activity breakdown at end of period Domain | Active clocks --------+---------------+---------------+------------------ core | SDRC | HSOTGUSB_IDLE | OMAPCTRL | MAILBOXES | wkup | GPT1 | 32KSYNC | GPIO1 | ckgen | CORE | PERI | 96M | 48M | 12M | 54M | EMU_CORE | per | GPIO2 | GPIO3 | GPIO4 | GPIO5 | GPIO6 | Total wakeups 1281, 42.7/s | IRQ 1010, 33.7/s | Timers 271, 9.0/s HW wakeups 107, 3.6/s | Real gp_timers expired 186, 6.2/s