maemo.org - Talk - View Single Post - [Announce] kernel-power stable v51 in Extras-Devel

Xagoln	2012-10-30 , 08:29
Posts: 262 \| Thanked: 315 times \| Joined on Jun 2010	#221

Okay, freemangordon, output from "kernel-config show" doesn't seem to vary so I presume you wanted to see /sys/power/sr_vdd1_voltage? I've included both anyway, as well as the gzipped /dev/mtd2 contents.

The vdd1 voltage value started out at 48, then dropped to 44, 39 and finally after about 10 minutes it was on 35.

Thanks for all your assistance.

Code:

ash-n900:/home/user/MyDocs/Music# kernel-config show
current kernel configuration:
current frequency: 500
supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150 
min. frequency: 500
max. frequency: 600
avoid frequencies: 125 250 
active frequencies: 500:39,360 550:54,400 600:60,430 720:60,430 805:60,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520 
SmartReflex VDD1=1, VDD2=0
governor ondemand: ignore nice load= 0, up threshold= 95, sampling rate= 300000, powersave bias= 0
ash-n900:/home/user/MyDocs/Music# cat /sys/power/sr_vdd1_voltage 
35

Attached Files

oops.log.gz (27.3 KB, 69 views)

Last edited by Xagoln; 2012-10-30 at 08:32.

Quote & Reply |

The Following User Says Thank You to Xagoln For This Useful Post:
Estel