Thread: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
View Single Post
ssciberras is offline ssciberras
2012-11-03 , 06:10
Posts: 20 | Thanked: 8 times | Joined on Jul 2012
#51
Originally Posted by thedead1440 View Post
ssciberras,

Since you have attempted to do a reflash do you mean you don't have any data to lose right?

If so can you post the output here of your reflash so that it proves the reflash really went through...I suspect you have had errors in your reflash...After all nobody flashes their phone 10 times and still has the same software issue...
here it is :


stefe@stefedi-HP:~/Downloads/n9$ sudo flasher -F DFL61_427.bin -F DFL61_EMMC_427.bin -f --flash-only=mmc
[sudo] password for stefe:
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 006.
Device identifier: 3579*********** (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 15341 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 007.
Device identifier: 357923042085409 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 85 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] mmc [finished 100 % 261587 / 261587 kB 10734 kB/s]
Success




and


stefe@stefedi-HP:~/Downloads/n9$ sudo flasher -F DFL61_427.bin -f
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 002, device address 007.
Device identifier: 357923042085409 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 85 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3157 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2460 kB/s]
[x] rootfs [finished 100 % 1170254 / 1170254 kB 11100 kB/s]
Updating SW release
Success



No errors




thanks

stefe