Thread: [HOWTO] Comprehensive Firmware Flashing Guide for N9
View Single Post
suyog is offline suyog
2012-12-20 , 18:12
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#400
Originally Posted by thedead1440 View Post
suyog,

I'm not very sure about your issue but if you are to use the --erase-user-data=secure flag AFAIK you should be including both the rootfs.bin and emmc.bin i.e. flasher -f -F rootfs.bin -F emmc.bin --erase-user-data=secure

Maybe do that and see if your hardware is being detected... Someone else with more knowledge of this should advice on what else should be done if its just a software issue...
Thanks for reply. As I posted earlier, while using Android via nitdroid also I am unable to detect Cellular network so I am almost certain that this looks like hardware issue.

But now I am facing issues exactly like @jorge. N9's battery was down and it switched off at end of the day. Then I plugged it in wall USB charger which comes with N9. No luck , it won't charge or turn on at all. No LED while plugged to AC Mains.

If I plug in to my laptop USB, LED blinks for a while and then goes off. It even vibrates but nothing happens after that.

I tried to check battery level by trying to run flasher and it says 0% but flasher detects it.
I will try to keep it plugged in to laptop overnight and see if that helps. I am not sure if all issues are hardware related or software but when I owned same N9 for over 3 months , I never faced anything like this. Even my earlier N9 16GB also never had any hardware issue.

I will be grateful if anyone in this forum from Poland can check in local Nokia care if they provide service as my N9 is from Poland.
I wanted to know if Nokia Care in Poland demands proof of purchase/Bill to get phone serviced by them. If that is possible I am willing to send it all the way to Poland.