maemo.org - Talk - View Single Post - [HOWTO] Comprehensive Firmware Flashing Guide for N9

	Halftux	2012-12-26 , 15:55
	Posts: 878 \| Thanked: 2,535 times \| Joined on Feb 2012 @ Germany	#409

Originally Posted by royalparthbisen

..... I have tried to flash my device but its not detecting my devics at time of flash also so please tell me what to do ....... Plz respond me as early as possible .........

I guess you are using windows OS. Open the one click flasher with 7zip or similar. Extract and install Nokia_Connectivity_Cable_Driver.msi. Now connect your N9 and it should be detected from windows and should get enough power for charging.
If this is the case everything is fine. Shutdown and disconnect your N9, start one click flasher and connect the phone again it should start automatically. Maybe some driver will installed and after that it should start flashing.
In the end you should see something like this:

Updating SW release
Success
Status: 0
Press Enter to exit & Unplug the USB cable from the device to boot new flashed image...

A better way is using linux for less trouble

__________________
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc

Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM

Quote & Reply |