View Single Post
Posts: 41 | Thanked: 5 times | Joined on Aug 2011 @ Lima, Peru
#179
Originally Posted by Estel View Post
emotion, could you do some testing, as your HD seems to be extremely picky, thus good test case for "stubborn" devices?

Please, try modifying sleep value:
Code:
charger_mode boost
sleep 4
... to 10, and check if it fixes your problem. If yes, please try 9, and check if it still works ok. If yes, repeat for 8, 7, 6... Until you run into too low sleep value. Then, please, report lowest sleep number, that works ok for repeated hostmode enabling.

Thanks in advance.

/Estel

Hello Estel. Use the winSCP and openshh and change the value 10, then reseting N900 and mount the HDD, it seemed better, so I proceeded to change the value to 9, reset the N900 and started again with the HDD, but since there could no longer connect, reset several times and nothing. Then I had to reinstall the deb package and everything was back to being as before. There was no improvement with changing values.
 

The Following User Says Thank You to emotion For This Useful Post: