maemo.org - Talk - View Single Post - [HOWTO] Compiling new kernels on Harmattan device

jackburton	2013-03-17 , 22:33
Posts: 466 \| Thanked: 661 times \| Joined on Jan 2009	#1

I finally managed to compile and flash a custom kernel for my N950 and N9 to get bluetooth pan tethering working with NAT modules. I am so happy now with the PAN sharing that I can now move from Maemo5/N900 to Harmattan platform device!

I first did this on my N950. I then did it also on the N9. The SDK doesn't seem to have sources for PR1.3 used on N9. Anybody know where to get that?

Here I've documented the exact steps I took. There are lots of posts about open mode kernels and how to flash the ones that exist already, but I could not find information on the steps used to produce those kernels in order to customize them. Hope this helps others who want to compile their own kernels.

This post is still a work in progress. I will try to make it prettier over time. Just wanted to get the information out there.

Thanks:

javispedro for all the helpful posts in meego forums on open mode kernel and the open mode kernel thread here.
qole for previous work on easy-chroot
rcolistete for easy-chroot on Harmattan and on-device SDK work

References:

Open questions:

~~Where to get PR1.3 source and config?~~
Why does my initial make command produce the release error?

Downloads
You can download my nat-enabled kernel and modules from here:
http://www.ctrl-h.net/nokia/harmattan/pr1.2/
http://www.ctrl-h.net/nokia/harmatta...3/kernel/btlc/
http://www.ctrl-h.net/nokia/harmatta.../kernel/lopan/

Instructions:

Follow the instructions to get the firmware and emmc for your device: http://talk.maemo.org/showthread.php?t=82693

Download the 3.12 Harmattan flasher from:
http://skeiron.org/tablets-dev/maemo-dev-env-downloads/

Download the open mode kernel (you'll use this to be able to chroot and compile on the device itself. It's also a good way to learn how to flash the kernel before you build your own):

Nokia N950 PR1.2: http://maemo.cloud-7.de/HARM/N9/1.2/openmode-kernel/

Nokia N9 PR1.3:
http://maemo.cloud-7.de/HARM/N9/1.3/openmode-kernel/

Flash the open mode kernel: (Here I am wiping the whole device, you may have reason not to do this, though you'll definitely want to do this at some point as described later in the instructions):

Code:

flasher -F ../../navifirmplus_1.7/NaviFirm+\ 1.7/Fw/059J228/DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958_ARM.bin -F ../../navifirmplus_1.7/NaviFirm+\ 1.7/Fw/059J228/DFL61_HARMATTAN_40.2012.13-7.MEA_EMMC_MEA.bin -k zImage-2.6.32.54-dfl61-20121301 -f

Here is the more brief version of kernel-only flash:

Code:

flasher -F img.bin -k zImageC --flash-only=kernel -f -R

See the other posts on flashing for different variations of the flasher command to learn more.

Unplug the phone from the computer and it will boot to the open mode kernel

Configure a network connection

Enable developer-mode (settings; security; developer-mode)

Check open mode with the command "accli -I" after the phone reboots. You should see "open" (you probably already saw a warning on boot which confirms this, too. You can clear this warning in later steps).

Follow the steps here to get an SDK chroot on the device:
http://talk.maemo.org/showthread.php?t=86158

I used the steps on that post in 2B

Get easy-chroot package according to:
http://talk.maemo.org/showthread.php?p=1247020

I do this: I download the .deb then

Code:

devel-su
dpkg -i /home/user/.downloads/easy-chroot_0.2.0-1harmattan1_armel.deb

then follow the steps to get SDK where it says "download my Harmattan SDK modified image"

Download the lzma direct to the N9 or using a computer and transfer using USB.

Extract it according to the instructions

Code:

xz -d harmattan-sdk.img.ext3.lzma

I like to mount a separate dir for sources and compiling by creating an image file:
on the device as root do

Code:

dd if=/dev/zero of=/home/user/MyDocs/src.img.ext3 bs=1M count=2222

then

Code:

/sbin/mkfs.ext3 /home/user/MyDocs/src.img.ext3

Code:

mkdir /home/user/SDK

as root, mount the sdk image with:

Code:

qmount /home/user/MyDocs/harmattan-sdk.img.ext3 /home/user/SDK

Mount the additional space with:

Code:

qmount /home/user/MyDocs/src.img.ext3 /home/user/SDK/usr/src

Now qchroot:

Code:

qchroot /home/user/MyDocs/harmattan-sdk.img.ext3 /home/user/SDK

Create a place to compile the kernel sources:

Code:

mkdir -p /usr/src/dpkg/k/kernel/

change to the compiling location:

Code:

cd /usr/src/dpkg/k/kernel

get the kernel source:

Code:

apt-get source kernel

Get the openmode patch:

Code:

wget http://maemo.cloud-7.de/HARM/N9/1.2/...openmode.patch

Apply the open-mode patch from one dir up from kernel source:

Code:

 patch -p0 < openmode.patch

Copy the config to the kernel directory:

Code:

cp arch/arm/configs/rm581_defconfig .config

Make the old config

Code:

make oldconfig

Modify the config to have the modules you want:

Code:

make menuconfig

(before this will work, you need the libncurses5-dev package in the SDK chroot). On the N9 with no keyboard, you need to use font size 6 or 7 in portrait mode for the terminal to be large enough for menu config.

Here are the places in menu config that I changed to enable IP NAT and MASQUERADE for Bluetooth tethering:

Networking Support; Networking Options; Network packet filtering framework (netfilter); Core Netfilter Configuration; Netfilter connection Tracking Support <M>;

Networking Support; Networking Options; Network packet filtering framework (netfilter); IP: Netfilter Configuration; IPv4 connection tracking support (required for NAT) <M>, Full NAT <M>, MASQUERADE target support <M>

A few additional packages are needed in order to compile. Do

Code:

apt-get install diff lzop

Compile with

Code:

make ARCH=arm zImage

I get this error (no idea why, I assume it's due to not using dpkg scripts that read dpkg-changelog):

Code:

CHK include/linux/utsrelease.h 

"2.6.32.48cat:include/config/kernel.release:Nosuchfileordirectory-dfl61" exceeds 64 characters 

make: *** [include/linux/utsrelease.h] Error 1

If anybody knows why this happens, please let me know so I can do this some proper way rather than the workaround below.

I work around it by first editing Makefile and appending a letter (in this case, "c") to the EXTRAVERSION such as:

Code:

    VERSION = 2 
    PATCHLEVEL = 6 
    SUBLEVEL = 32 
    EXTRAVERSION = .48c

Then I modify the include/config/kernel.release file to match the version string from the Makefile with this in its contents:

Code:

2.6.32.48c-dfl61

Then compile again with

Code:

make ARCH=arm zImage

Compile the modules with

Code:

make ARCH=arm modules modules_install

From OUTSIDE the chroot and as root, copy the modules directory from /home/user/SDK/lib/modules/2.6.32.48c-dfl61-20115101 to /lib/modules and do a

Code:

depmod -a 2.6.32.48c-dfl61-20115101

Copy the zImage from /home/user/SDK/usr/src/dpkg/k/kernel/kernel-2.6.32/arch/arm/boot to MyDocs

Attach to the computer doing the flashing and mount USB (since the SDK image is in MyDocs, you may need to reboot before mass storage will work again to transfer the kernel. Or you could sftp off or sftp in to grab it).

Get the kernel off your N9 or N950 via USB or SFTP upload/download

Power off

Flash the new kernel and reboot!

There are several ways to reflash. If you just want to test flashing the kernel, then something like this will work:

Code:

flasher -F img.bin -k zImageC --flash-only=kernel -f -R

Repeated Password Prompts

With open mode kernels, you will need to flash the whole system so that new aegis keys for open mode will be created on first boot. If you don't do this, then your passwords for services won't get saved and you'll have to keep re-entering them in, which is very annoying! Based on what I've read on the forums, doing application-based backup/restore *should* work after doing a full wipe.

Code:

flasher -F img.bin -F emmc.bin -k zImageC -f -R

Warranty VOID Message

If you don't like the warranty void message, there are a couple of steps before you even start this whole thing (see http://talk.maemo.org/showpost.php?p...ostcount=358):

Flash a completely stock system.

Install developer tools

run:

Code:

disclaimer-cal remove View-openmode

START THIS WHOLE THING OVER FROM SCRATCH

When you flash the new kernel, add the --suppress-warranty-warning flag. E.g.

Code:

flasher -F img.bin -F emmc.bin -k zImageC --suppress-waranty-warning -f -R

Last edited by jackburton; 2013-08-22 at 14:12. Reason: Updates

Quote & Reply |

The Following 26 Users Say Thank You to jackburton For This Useful Post:
ajalkane, bibek, Boxeri, ck2nb, coderus, dadaniel, death_jax, farfary, Halftux, hrbani, Hurrian, Iryus, jalyst, javispedro, khan.orak, ladoga, minimos, Mric, mrsellout, OVK, peterleinchen, ranbaxy, rcolistete, Rusnak-COBRA, szopin, thedead1440