View Single Post
knobtviker's Avatar
Posts: 665 | Thanked: 2,388 times | Joined on Feb 2012 @ Zagreb, Croatia
#10
Code:
[Display-c1]
​
# Color phase adjustments for the c1.* display revision
# Each value consists of sets of 12 numbers, each forming a entry for certain
# brightness range, the sets contain, brightness values in lux*3.3
# (330 = 100 lux):
#  - brightness range lower limit (one of the ranges should start from 0)
#  - brightness range upper limit (one of the ranges should have -1 = unlimited)
#  - high brightness mode level
#  - 3 coefficients for output red channel (red, green, blue)
#  - 3 coefficients for output green channel (red, green, blue)
#  - 3 coefficients for output blue channel (red, green, blue)
​
Neutral=0;330;0;195;48;13;22;206;28;8;8;240;330;9900;0;195;48;13;22;206;28;8;8;240
Vivid=0;33000;0;255;0;0;0;255;0;0;0;255;33000;-1;0;275;-10;-10;-10;275;-10;-10;-10;275;33000;-1;1;295;-20;-20;-20;295;-20;-20;-20;295;33000;-10;2;315;-30;-30;-30;315;-30;-30;-30;315
Muted=0;-1;0;156;79;21;40;165;51;32;32;192
​
[Display-fe]
​
# Color phase adjustments for the fe.* display revision
# See above for details
​
Neutral=0;330;0;199;28;28;8;209;38;8;8;239;330;9900;0;199;28;28;8;209;38;8;8;239
Vivid=0;33000;0;255;0;0;0;255;0;0;0;255;33000;-1;0;275;-10;-10;-10;275;-10;-10;-10;275;33000;-1;1;295;-20;-20;-20;295;-20;-20;-20;295;33000;-10;2;315;-30;-30;-30;315;-30;-30;-30;315
Muted=0;-1;0;159;48;48;15;167;73;32;32;191
Instructions are selfexplanatory. 3 brightness numbers in lux units, followed by RGB format color, 3 numbers. Semicolon is a delimiter.
 

The Following 4 Users Say Thank You to knobtviker For This Useful Post: