Thread: [HOWTO] Comprehensive Firmware Flashing Guide for N9
View Single Post
rswelter is offline rswelter
2013-04-23 , 18:57
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#624
Originally Posted by rswelter View Post
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 14482 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 66 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[_] rootfs [writing 92 % 1087488 / 1170206 kB 8725 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3024 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1380 kB/s]
[x] rootfs [finished 100 % 1170206 / 1170206 kB 8639 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_009-OEM1-958_ARM.bin -f -R

this is after the main flash.
yes your one liner was perfect, though I did not rename file to roots.bin I forgot the -R
I will post that shortly
thanks
after cmt flash
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flasher-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
flasher: unrecognised option `--flasher-only=cmt'
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flasher-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
flasher: unrecognised option `--flasher-only=cmt'
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -f DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flash-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

ERROR: Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY
_001-OEM1-958_ARM.bin --flash-only=cmt -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1604
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16503 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1604
Server implements softupd protocol version 1.8
Success

C:\Program Files\Nokia\Flasher>
thanks dead for the help!!!