Hey guys, So I started the flashing process with the secure erase option and it's taking forever... I was wondering if it's safe to abort the process and start it again without secure erase? Code: user@kiwi> flasher -f -F N9_ N9_EMMC.bin N9_MAIN.bin user@kiwi> flasher -f -F N9_MAIN.bin --erase-user-data=secure flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. USB device found at bus 253, device address 3. Device serial number is N/A Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 11300 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 253, device address 3. Device serial number is Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1603 Server implements softupd protocol version 1.8 Battery level 19 %, continuing. Erasing, this may take a while.
user@kiwi> flasher -f -F N9_ N9_EMMC.bin N9_MAIN.bin user@kiwi> flasher -f -F N9_MAIN.bin --erase-user-data=secure flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. USB device found at bus 253, device address 3. Device serial number is N/A Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 11300 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 253, device address 3. Device serial number is Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1603 Server implements softupd protocol version 1.8 Battery level 19 %, continuing. Erasing, this may take a while.