Thread: BME Replacement
View Single Post
handaxe is offline handaxe
2013-05-21 , 01:38
Posts: 1,378 | Thanked: 1,604 times | Joined on Jun 2010 @ Göteborg, Sweden
#6
Further testing. Rebooted with wall-charger attached. Booted up properly. Connected wireless and ran sshd. Connected as root via ssh.

Code:
hal-device bme
Code:
udi = '/org/freedesktop/Hal/devices/bme'
  info.addons = { 'hald-addon-bme' } (string list)
  battery.type = 'pda'  (string)
  info.subsystem = 'unknown'  (string)
  info.product = 'Battery (BME-HAL)'  (string)
  battery.reporting.design = 1297  (0x511)  (int)
  info.udi = '/org/freedesktop/Hal/devices/bme'  (string)
  battery.present = true  (bool)
  battery.voltage.current = 4082  (0xff2)  (int)
  battery.reporting.unit = 'mAh'  (string)
  battery.is_rechargeable = true  (bool)
  battery.rechargeable.is_charging = true  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.reporting.current = 1307  (0x51b)  (int)
  battery.reporting.last_full = 1297  (0x511)  (int)
  battery.charge_level.current = 8  (0x8)  (int)
  battery.charge_level.last_full = 8  (0x8)  (int)
  battery.charge_level.design = 8  (0x8)  (int)
  battery.charge_level.percentage = 100  (0x64)  (int)
  battery.remaining_time = 2400  (0x960)  (int)
  battery.voltage.design = 4200  (0x1068)  (int)
  battery.voltage.unit = 'mV'  (string)
  battery.charge_level.capacity_state = 'ok'  (string)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.capabilities = { 'battery' } (string list)
  battery.charge_level.unit = 'bars'  (string)
  battery.remaining_time.calculate_per_time = false  (bool)
  maemo.charger.connection_status = 'connected'  (string)
  maemo.charger.type = 'wall charger'  (string)
  maemo.rechargeable.charging_status = 'on'  (string)
  maemo.rechargeable.positive_rate = true  (bool)
  maemo.bme.version = '1.0'  (string)
Disconnected wall-charger and then reconnected. Received message that device drawing more power than being provided. Via ssh ran
Code:
hal-device bme
:
Code:
udi = '/org/freedesktop/Hal/devices/bme'
  info.addons = { 'hald-addon-bme' } (string list)
  battery.type = 'pda'  (string)
  info.subsystem = 'unknown'  (string)
  info.product = 'Battery (BME-HAL)'  (string)
  battery.reporting.design = 1297  (0x511)  (int)
  info.udi = '/org/freedesktop/Hal/devices/bme'  (string)
  battery.present = true  (bool)
  battery.voltage.current = 3923  (0xf53)  (int)
  battery.reporting.unit = 'mAh'  (string)
  battery.is_rechargeable = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = true  (bool)
  battery.reporting.current = 1318  (0x526)  (int)
  battery.reporting.last_full = 1297  (0x511)  (int)
  battery.charge_level.current = 8  (0x8)  (int)
  battery.charge_level.last_full = 8  (0x8)  (int)
  battery.charge_level.design = 8  (0x8)  (int)
  battery.charge_level.percentage = 100  (0x64)  (int)
  battery.remaining_time = 33900  (0x846c)  (int)
  battery.voltage.design = 4200  (0x1068)  (int)
  battery.voltage.unit = 'mV'  (string)
  battery.charge_level.capacity_state = 'ok'  (string)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.capabilities = { 'battery' } (string list)
  battery.charge_level.unit = 'bars'  (string)
  battery.remaining_time.calculate_per_time = false  (bool)
  maemo.charger.connection_status = 'connected'  (string)
  maemo.charger.type = 'host 500 mA'  (string)
  maemo.rechargeable.charging_status = 'error'  (string)
  maemo.rechargeable.positive_rate = false  (bool)
  maemo.bme.version = '1.0'  (string)
Detecting wrong charger type. That may explain the differing charging profiles.
 

The Following 4 Users Say Thank You to handaxe For This Useful Post: