03:33:38 ~/Desktop/N9-059J217$ sudo flasher -F 62A0A79D_DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_LEGACY_280_ARM_RM-696_PRD_signed.bin -f --flash-only=cmt flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 002, device address 013. Device identifier: 351669052218994 (SN: N/A) Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_006 Sending ape-algo image (7103 kB)... 100% (7103 of 7103 kB, avg. 17034 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 002, device address 014. Device identifier: 351669052218994 (SN: N/A) Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1603 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_280 Image cert-sw skipped Image xloader skipped Image secondary skipped Image kernel skipped Image moslo skipped Image rootfs skipped Image mmc skipped Image tar skipped Image config skipped Battery level 87 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [_] cmt-algo [init 100 % 789 / 789 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [f] cmt-algo [init 0 % 789 / 789 kB NA ] [-] cmt-mcusw [pending 0 % 0 / 0 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Timeout while waiting for the HWBREAK Could not reboot into cold bootmode [Pipe 1] Finishing in error state with status 1 ======================================== ERROR: Failed to flash images