OK, printing is done, the buttons and Dpad are a too big(jammed in with brute force for the pic) so I will have to reprint those, good news is button hole allignment is nearly perfect but might tweak some by 0.2mm-0.3mm, if you look carefuly you can see the B and T keys through the peg holes. The buttons and Dpad look weird because I used my fingers to tear the print brim(helps printed stuff stay stuck to heated print bed) rather than bending and scraping/sanding it off. I will go with .1mm layers(first print was .4mm) and raise the print temp to 235 degrees C form 220 C in order to make the narrow push pegs more durable. I may also bevel or round off edges before printing if I feel like it.
The other issue is the USB and stereo ports are not placed correctly, I might even skip the USB port, otherwise the design is ready to use or hack.
I should also take a photography class.