powervr.service - PowerVR SGX
   Loaded: loaded (/usr/lib/systemd/system/powervr.service; enabled)
   Active: failed (Result: exit-code) since Mon 2013-08-19 04:29:09 CDT; 1min 2s ago
  Process: 260 ExecStart=/usr/sbin/pvrsrvinit (code=exited, status=1/FAILURE)
  Process: 258 ExecStartPre=/sbin/modprobe omaplfb (code=exited, status=0/SUCCESS)

Aug 19 04:29:08 alarm systemd[1]: Starting PowerVR SGX...
Aug 19 04:29:09 alarm systemd[1]: Started PowerVR SGX.
Aug 19 04:29:09 alarm systemd[1]: powervr.service: main process exited, code=exited, status=1/FAILURE
Aug 19 04:29:09 alarm systemd[1]: Unit powervr.service entered failed state.

[    60.035] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[    60.043] X Protocol Version 11, Revision 0
[    60.046] Build Operating System: Linux 3.2.34-1-FARM armv7l 
[    60.048] Current Operating System: Linux alarm 3.5.7.5-n900 #1 PREEMPT Sun Feb 17 05:44:07 EET 2013 armv7l
[    60.049] Kernel command line: root=/dev/mmcblk1p6 rootwait init=/bin/systemd omapfb.vram=0:3M,1:3M,2:3M quiet
[    60.054] Build Date: 01 July 2013  07:12:46AM
[    60.057]  
[    60.060] Current version of pixman: 0.30.2
[    60.066] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    60.066] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    60.078] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 19 05:06:31 2013
[    60.087] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    60.093] (==) No Layout section.  Using the first Screen section.
[    60.093] (==) No screen section available. Using defaults.
[    60.093] (**) |-->Screen "Default Screen Section" (0)
[    60.093] (**) |   |-->Monitor "<default monitor>"
[    60.099] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    60.099] (==) Automatically adding devices
[    60.100] (==) Automatically enabling devices
[    60.100] (==) Automatically adding GPU devices
[    60.118] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    60.119] 	Entry deleted from font path.
[    60.119] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    60.119] 	Entry deleted from font path.
[    60.120] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    60.120] 	Entry deleted from font path.
[    60.120] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    60.122] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    60.122] 	Entry deleted from font path.
[    60.122] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    60.122] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    60.122] (==) ModulePath set to "/usr/lib/xorg/modules"
[    60.122] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    60.122] (II) Loader magic: 0x1c0e58
[    60.122] (II) Module ABI versions:
[    60.122] 	X.Org ANSI C Emulation: 0.4
[    60.122] 	X.Org Video Driver: 14.1
[    60.123] 	X.Org XInput driver : 19.1
[    60.123] 	X.Org Server Extension : 7.0
[    60.129] Initializing built-in extension Generic Event Extension
[    60.133] Initializing built-in extension SHAPE
[    60.136] Initializing built-in extension MIT-SHM
[    60.139] Initializing built-in extension XInputExtension
[    60.142] Initializing built-in extension XTEST
[    60.145] Initializing built-in extension BIG-REQUESTS
[    60.148] Initializing built-in extension SYNC
[    60.151] Initializing built-in extension XKEYBOARD
[    60.154] Initializing built-in extension XC-MISC
[    60.157] Initializing built-in extension SECURITY
[    60.159] Initializing built-in extension XINERAMA
[    60.162] Initializing built-in extension XFIXES
[    60.165] Initializing built-in extension RENDER
[    60.167] Initializing built-in extension RANDR
[    60.170] Initializing built-in extension COMPOSITE
[    60.172] Initializing built-in extension DAMAGE
[    60.175] Initializing built-in extension MIT-SCREEN-SAVER
[    60.177] Initializing built-in extension DOUBLE-BUFFER
[    60.179] Initializing built-in extension RECORD
[    60.181] Initializing built-in extension DPMS
[    60.183] Initializing built-in extension X-Resource
[    60.185] Initializing built-in extension XVideo
[    60.187] Initializing built-in extension XVideo-MotionCompensation
[    60.189] Initializing built-in extension XFree86-VidModeExtension
[    60.191] Initializing built-in extension XFree86-DGA
[    60.192] Initializing built-in extension XFree86-DRI
[    60.194] Initializing built-in extension DRI2
[    60.194] (II) LoadModule: "glx"
[    60.202] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    60.226] (II) Module glx: vendor="X.Org Foundation"
[    60.226] 	compiled for 1.14.2, module version = 1.0.0
[    60.227] 	ABI class: X.Org Server Extension, version 7.0
[    60.227] (==) AIGLX enabled
[    60.228] Loading extension GLX
[    60.229] (==) Matched modesetting as autoconfigured driver 0
[    60.229] (==) Matched fbdev as autoconfigured driver 1
[    60.229] (==) Assigned the driver to the xf86ConfigLayout
[    60.229] (II) LoadModule: "modesetting"
[    60.233] (WW) Warning, couldn't open module modesetting
[    60.233] (II) UnloadModule: "modesetting"
[    60.233] (II) Unloading modesetting
[    60.233] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    60.233] (II) LoadModule: "fbdev"
[    60.234] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    60.259] (II) Module fbdev: vendor="X.Org Foundation"
[    60.260] 	compiled for 1.14.0, module version = 0.4.0
[    60.260] 	Module class: X.Org Video Driver
[    60.260] 	ABI class: X.Org Video Driver, version 14.1
[    60.260] (II) FBDEV: driver for framebuffer: fbdev
[    60.260] (++) using VT number 1

[    60.261] (WW) Falling back to old probe method for fbdev
[    60.261] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    60.261] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 16/16
[    60.261] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    60.261] (==) FBDEV(0): RGB weight 565
[    60.262] (==) FBDEV(0): Default visual is TrueColor
[    60.262] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    60.262] (==) FBDEV(0): SwapMethod is flip
[    60.262] (==) FBDEV(0): Enabling vblank synchronization
[    60.262] (==) FBDEV(0): Enabling synchronous rendering
[    60.262] (==) FBDEV(0): Using 3 page flip buffers.
[    60.262] (==) FBDEV(0): Screen size can't be changed
[    60.262] (==) FBDEV(0): Disabling poisoning in GetBuffers
[    60.263] (==) FBDEV(0): Disabling poisoning in SwapBuffers
[    60.279] (II) FBDEV(0): Output LCD has no monitor section
[    60.280] (II) FBDEV(0): Output TV has no monitor section
[    60.280] (II) FBDEV(0): Printing probed modes for output LCD
[    60.280] (II) FBDEV(0): Modeline "800x480"x57.2   24.00  800 828 852 856  480 483 487 490 (28.0 kHz eP)
[    60.280] (II) FBDEV(0): Printing probed modes for output TV
[    60.280] (II) FBDEV(0): Modeline "800x480"x57.2   24.00  800 828 852 856  480 483 487 490 (28.0 kHz eP)
[    60.280] (II) FBDEV(0): Modeline "480x800"x57.2   24.00  480 483 487 490  800 828 852 856 (49.0 kHz e)
[    60.280] (II) FBDEV(0): Output LCD connected
[    60.280] (II) FBDEV(0): Output TV disconnected
[    60.281] (II) FBDEV(0): Using exact sizes for initial modes
[    60.281] (II) FBDEV(0): Output LCD using initial mode 800x480
[    60.281] (--) FBDEV(0): Virtual size is 800x480 (pitch 0)
[    60.281] (**) FBDEV(0):  Driver mode "800x480": 24.0 MHz, 28.0 kHz, 57.2 Hz
[    60.281] (II) FBDEV(0): Modeline "800x480"x57.2   24.00  800 828 852 856  480 483 487 490 (28.0 kHz eP)
[    60.281] (==) FBDEV(0): DPI set to (96, 96)
[    60.281] (II) Loading sub module "fb"
[    60.281] (II) LoadModule: "fb"
[    60.283] (II) Loading /usr/lib/xorg/modules/libfb.so
[    60.294] (II) Module fb: vendor="X.Org Foundation"
[    60.294] 	compiled for 1.14.2, module version = 1.0.0
[    60.294] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    60.329] (II) Loading sub module "exa"
[    60.329] (II) LoadModule: "exa"
[    60.331] (II) Loading /usr/lib/xorg/modules/libexa.so
[    60.338] (II) Module exa: vendor="X.Org Foundation"
[    60.338] 	compiled for 1.14.2, module version = 2.6.0
[    60.338] 	ABI class: X.Org Video Driver, version 14.1
[    60.339] (II) EXA(0): Driver allocated offscreen pixmaps
[    60.339] (II) EXA(0): Driver registered support for the following operations:
[    60.339] (II)         Solid
[    60.339] (II)         Copy
[    60.339] PowerVR device not found
[    60.340] (EE) 
Fatal server error:
[    60.340] (EE) PVR2D_Init() failed
[    60.340] (EE) 
[    60.340] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    60.340] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    60.341] (EE) 
[    60.348] (EE) Server terminated with error (1). Closing log file.