I have a N9 in my hands. This in the situation:
- I don't know the history of the phone
- the screen have been replaced by someone else, he said is new
- the flat cable from the digitizer to the main board is missing
- when i use Flasher, the output screen disappears in few seconds and is pretty impossible read the output ([SOLVED] with the help of The Flash from DC Comics. I took some screenshots with PrtScr)

Below, I use these conventions:
- main.bin = DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM
- emmc.bin = 2B49474F_DFL61_HARMATTAN_40.2012.13-7.ITALY_EMMC_ITALY
extracted from 059K0X7_RM-696 NDT ITALY CYAN 16GB.tar downloaded from http://skeiron.org/firmware/N9/40.2012.21.3/

Some screenshots:
flasher -i


flasher -f -F fm.bin


flasher -f -F main.bin -F emmc.bin --flash-only=mmc


The feedback from the phone is just the white led.
When I pressthe main switch, the led will turn on fixed for few seconds, after which sometime blink fast, sometime blink slow, sometime is turned off. No vibrations.

With phone connected via usb, sometime the pc make the typical sound of usb mass storage connected/disconneted.

From what i read from the screenshots, the N9 has the memory completly empty, no OS present.

Navifirm+ does not connect with server.

I use Windows 7 or Ubuntu

What i have to do to restore the N9? Thank you