Hi,

I'm following the excellent guides at http://wiki.maemo.org/Ubiboot and http://wiki.maemo.org/Sailfish but I've run into an issue with the Ubiboot-02 flash step:

root@fejd-tower:/home/fejd/n9_flash/059H2M6_RM-696 NDT 64GB ROW BLACK# flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only=kernel -f -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Picked ape-algo from a FIASCO file
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 033.
Device identifier: 357923041815376 (SN: N/A)
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 24987 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 001, device address 034.
Device identifier: 357923041815376 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version <none>
Image cert-sw not present
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[ ] kernel [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] kernel [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Image too big to fit partition: image 219776+11952768 bytes
[Pipe 0] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

The only error indicators I see are:
"ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error"
and:
Image too big to fit partition: image 219776+11952768 bytes

Has anyone else run into this or know what the problem could be? Googling the SU_GET_UPDATE_STATUS_REQ error code leads me to a few reported N900 bugs where discussions seem to point to corrupted FAT. I did the first flash step with "sudo flasher -F <yourmainfirmware.bin> -f", so I didn't flash the eMMC, nor did I do the "Zeroize Method". Would any of those methods help?

Some other deviations I did from the guide:
- I couldn't download the Firefox OS files, but I believe there's still a preint file for it
- I didn't push zImage.pr13 since it says it's not recommended
- I didn't unpack Nemo directly after flashing MOSLO - there was a reboot in between (i.e. I re-ran the MOSLO flash and then unpacked Nemo into Alt_OS).