Hello,

I tried to follow the recommended steps to flash, using a Mac. This is what I get:


Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK root# flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -f
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is N/A
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 30069 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 2922 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1762 kB/s]
[x] rootfs [finished 100 % 1170282 / 1170282 kB 12270 kB/s]
Updating SW release
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK

root# flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.NOMAPS_EMMC_NOMAPS.bin --flash-only=mmc
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 93 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] mmc [finished 100 % 261587 / 261587 kB 19949 kB/s]
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK

root# flasher -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 29, device address 7.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Success
Bogdans-MacBook-Pro:059H2M6_RM-696 NDT 64GB ROW BLACK root#

Success as far as the eye can see, but when I boot the device I get yellow waring sign and an error like:

"Device not working properly

Try updating the device software with Nokia Software Updater...

Security problem (aegis-exec):
/usr/lob/libaegis_crypto.so.1.0.0"

Any idea on how to fix this ? I tried the suggested NSU on Windoze, but it fails at the end of the update - after it reboots the device gets hung on the NOKIA logo.

Also I should mention, that flashing on Mac seems to randomly fail at various percentage of completion. The run above is a rare struck of luck, after a few retries.

What's the normal usage for "flasher -R" ? Should the phone be left connected to USB after it boots ? I read at http://talk.maemo.org/showpost.php?p...75&postcount=1 that it should be yanked out of USB.

Any help would be much appreciated.

Thanks !