Propably not..

Seems that it can't communicate with the keyboard over I2C.

You could use I2C tool (https://github.com/kimmoli/i2ctool/b...-1.armv7hl.rpm) to check is there something wrong.
(see also here http://talk.maemo.org/showthread.php?t=92329)

First stop and disable tohkbd.service

download, install i2ctool package, start that app, turn vdd on, run probe.
the address 3B should be green'ish, (propably 50...57 blue if the microswitch is pressed), and all others yellow.

If 3B is yellow, then there is no comms. Might be caused that the tohkbd is not full in place, or the flex-cable is damaged? dirkvl will then provide support for this.

(Turn vdd OFF before closing i2ctool app)

If addres 3B was green.. then this needs more debugging...