Thread: Flashing N900: CMT flashing failed
View Single Post
aby2210 is offline aby2210
2014-07-15 , 21:03
Posts: 24 | Thanked: 2 times | Joined on Feb 2012
#28
Originally Posted by mccrea119 View Post
my phone won't finish flashing, i think at the end after kennel or something it says CMT flashing failed or flashing failed can't really see because it closes the cmd soon after, please help me... please
Sorry For Sooo Late Rply!!

If You Still could not figure it out..here is the solution!!

First Try Some Basic Resolutions Before Going For Anything Complicated!!

1) Keep a Piece of paper(or another unused sim) just above your sim slot(obviously with a sim in it) and then try flashing again..

Didn't Work? Ok!

Go For This Tutorial [ http://www.jabawok.net/?p=14 ]

Worked For Me and dktr.k1 as well..

Originally Posted by dktr.k1 View Post
WOW! very nice!

I had the "Al telephony functions"-problem. So I opened my phone (not the 1st time) lifted up the contact-pins to the GSM anthena, but problem persisted...Then re-flashed, but had the CMT failure...I did the "pressure-your phone while ereasing and programming CMT" and the flashing process worked! So, I took your advide and did the following:

https://fbcdn-sphotos-d-a.akamaihd.n...42887194_n.jpg

. It was a bit scary to take out the aluminium shield for the 1st time!! But now my N900 doesn't lose the THelephony functions so I'm really satisfied

Thanx for the advice!
Best Of Luck