Thread: could not flash nokia n900
View Single Post
sujanshrestha308 is offline sujanshrestha308
2014-07-22 , 00:19
Posts: 6 | Thanked: 0 times | Joined on Jul 2014
#3
Originally Posted by pichlo View Post
Eh?



Or maybe even with the correct flasher. I don't know what version is that, but the version that works with our N900s is 3.5.
I exactly followed the following procedure:
Installed the latest version of the Flasher i.e. v3.5
Downloaded the latest firmware (.bin) and saved it to %ProgramFiles%\maemo\flasher-3.5\
The battery was made full.
Switched off the device.
Opened the Command Prompt (Started Run) and typed cmd then pressed Enter.And typed dis.
cd "%ProgramFiles%\maemo\flasher-3.5"
I then Held the u key on the device keyboard and connected the USB cable at the same time.I Held the u key until a dim screen showing nokia logo with usb icon on top right corner appeared.
Then I typed the following command followed by hitting enter:
flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

Then it showed above msg.Then nothing changed.My device wasnt flashed.If it was the problem with the usb cable,let me tell u dat it is the same usb cable i have been using to transfer data via pc in mass storage mode.Plz,consider my problem and suggest working reply.