Thread: could not flash nokia n900
View Single Post
sujanshrestha308 is offline sujanshrestha308
2014-07-22 , 00:27
Posts: 6 | Thanked: 0 times | Joined on Jul 2014
#4
Originally Posted by vincr View Post
Code:
Suitable USB device not found, waiting.

Sure you did it correct? Start flasher with correct flasher command, slide open your N900 and hold the u button pressed and then connect the usb cable which is connected to a 'main usb port' of your pc, not a hub or something. If fails again try an other usb cable.
"connect the usb cable which is connected to a 'main usb port' of your pc, not a hub or something."
I couldnt get dis.I connected the usb cable right in the front where we usually do,don't particularly know if its actually a main usb port or not.
I exactly followed the following procedure:
Installed the latest version of the Flasher i.e. v3.5
Downloaded the latest firmware (.bin) and saved it to %ProgramFiles%\maemo\flasher-3.5\
The battery was made full.
Switched off the device.
Opened the Command Prompt (Started Run) and typed cmd then pressed Enter.And typed dis.
cd "%ProgramFiles%\maemo\flasher-3.5"
I then Held the u key on the device keyboard and connected the USB cable at the same time.I Held the u key until a dim screen showing nokia logo with usb icon on top right corner appeared.
Then I typed the following command followed by hitting enter:
flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f
Then it showed above msg.Then nothing changed.My device wasnt flashed.If it was the problem with the usb cable,let me tell u dat it is the same usb cable i have been using to transfer data via pc in mass storage mode.Plz,consider my problem and suggest working reply.