Originally Posted by malmostoso

Hey everybody,

I wanted to flash my N9 for resale, so I followed the instructions for the "zeroize device" process. This is what I did:

Code:

root@nostromo:/home/jack/nokia/059K772_RM-696 NDT SWITZERLAND BLACK 64GB# flasher -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin --erase-user-data=secure
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 003, device address 018.
Device identifier: 357923041408628 (SN: N/A)
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 40093 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 003, device address 019.
Device identifier: 357923041408628 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8

Battery level 67 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 68 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[x] cmt-mcusw    [finished   100 %    6050 /    6050 kB    3016 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1796 kB/s]
[x] rootfs       [finished   100 % 1170206 / 1170206 kB   11969 kB/s]
Updating SW release
Success
root@nostromo:/home/jack/nokia/059K772_RM-696 NDT SWITZERLAND BLACK 64GB# flasher -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -F 030AF44E_DFL61_HARMATTAN_40.2012.13-7.ALPS_EMMC_ALPS.bin --flash-only=mmc
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 003, device address 019.
Device identifier: 357923041408628 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 69 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] mmc          [finished   100 % 1629459 / 1629459 kB   20283 kB/s]
Success

I do not see any errors, but the erasing process took 5 minutes. Is this normal?
I am also not sure I picked the correct files for flashing. As a "main.bin" I selected the 1.2GB "D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin", and as "emmc.bin" I used the 1.7GB "030AF44E_DFL61_HARMATTAN_40.2012.13-7.ALPS_EMMC_ALPS.bin".

Is this all correct?
When I rebooted the phone was flashed and all my data seems to be gone, but I'm just unsure since it took such a short time.

Thank you!