Thread: WiFi hardware broken?
View Single Post
Smobbl_Bobbl is offline Smobbl_Bobbl
2015-03-19 , 05:38
Posts: 7 | Thanked: 1 time | Joined on Jan 2014
#2
I found that dmesg output, happening very frequently:
Code:
[   86.682067] wl1271: ERROR sdio read failed (-84)
[   86.682098] wl1271: WARNING unsupported chip id: 0x22222222
[   87.003234] wl1271: ERROR sdio read failed (-84)
[   87.003265] wl1271: WARNING unsupported chip id: 0x22222222
[   87.326171] wl1271: ERROR sdio read failed (-84)
[   87.326202] wl1271: WARNING unsupported chip id: 0x22222222
[   87.329010] wl1271: ERROR firmware boot failed despite 3 retries
but then occasionally:
Code:
[22532.138763] wl1271_sdio mmc1:0001:2: firmware: requesting wl1271-fw.bin
[22532.804168] wl1271: firmware booted (Rev 6.1.1.39.339)
[22538.197540] wl1271: down
and
Code:
[22538.733093] wl1271: firmware booted (Rev 6.1.1.39.339)
[22538.783996] wlan0: authenticate with 1c:c6:3c:8d:e4:ae (try 1)
[22538.786376] wlan0: authenticated
[22538.786468] wlan0: associate with 1c:c6:3c:8d:e4:ae (try 1)
[22538.978820] wlan0: associate with 1c:c6:3c:8d:e4:ae (try 2)
[22538.982971] wlan0: RX AssocResp from 1c:c6:3c:8d:e4:ae (capab=0x411 status=0 aid=2)
[22538.983001] wlan0: associated
[22543.046508] wl1271: Association completed.
[22555.029846] wlan0: disassociated from 1c:c6:3c:8d:e4:ae (Reason: 8)
[22555.588256] wl1271: WARNING Unable to flush all TX buffers, timed out.
[22555.605346] wlan0: deauthenticating from 1c:c6:3c:8d:e4:ae by local choice (reason=3)