I've been using Leinards guide to mount the home partition and everything else is fine, but I can't seem to be able to make both fuse-mount points. df -h gives:

Filesystem Size Used Avail Use% Mounted on
rootfs 14G 1,8G 12G 14% /
/dev/mmcblk0p28 14G 1,8G 12G 14% /
devtmpfs 404M 64K 404M 1% /dev
tmpfs 405M 200K 405M 1% /dev/shm
tmpfs 405M 31M 375M 8% /run
tmpfs 405M 0 405M 0% /sys/fs/cgroup
tmpfs 405M 4,0K 405M 1% /tmp
/dev/mmcblk0p18 64M 45M 20M 70% /firmware
/dev/mmcblk0p28 14G 1,8G 12G 14% /home
/dev/mmcblk0p25 7,9M 4,2M 3,8M 53% /persist
/dev/mmcblk0p19 7,9M 4,1M 3,9M 52% /drm
/dev/mmcblk0p9 48M 9,0M 39M 19% /var/systemlog
tmpfs 405M 0 405M 0% /mnt/asec
tmpfs 405M 0 405M 0% /mnt/obb
/dev/mmcblk1p1 59G 25G 31G 45% /mnt/sd
/dev/mmcblk1p1 59G 25G 31G 45% /home/nemo
/dev/mmcblk1p1 59G 25G 31G 45% /data/media
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/data
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/bin
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/sbin
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/lib
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/usr
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/var
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/etc
tmpfs 405M 4,0K 405M 1% /opt/alien/tmp
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/home
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/vendor
devtmpfs 404M 64K 404M 1% /opt/alien/dev
tmpfs 405M 200K 405M 1% /opt/alien/dev/shm
tmpfs 405M 0 405M 0% /opt/alien/sys/fs/cgroup
tmpfs 405M 31M 375M 8% /opt/alien/run
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/media
/dev/mmcblk0p28 14G 1,8G 12G 14% /opt/alien/system_jolla
/dev/fuse 14G 1,8G 12G 14% /opt/alien/home/nemo/android_storage
/dev/fuse 59G 25G 31G 45% /home/nemo/android_storage

I am now using sailfish 1.1.9.28 and I noticed that alien.sh script has changed to

/opt/alien/system/script/alien_setup_chroot.sh

Previously I managed to get the mounts working changing the alien.sh as suggested here. Any ideas how I should change the alien_setup_chroot.sh file, or am I missing something else?

thanks