USB LAN Connection Windows 7 Internet to N900

Prerequirements usb lan:
[PC]
driver e.g. from madde

Connect a windows system with usb lan

1. [N900] connect to internet wifi/gprs/bt-pan
2. [N900] genwall {route-usb} click module button and load Windows module
3. [N900-PC] connect the usb cable (PC Suite-Modus)
4. [PC] run ncpa.cpl then properties from internet network device, sharing, activate ics and choose network from N900 usb lan.
5. [N900] genwall {route-ipinfo} click dhclient usb0, ok

Now the N900 should have an ip 192.168.137.XXX and the tmp resolv should have domain mshome.net and nameserver 192.168.137.1 entry. It could be that some apps need a dummy connection.

Disconnecting:

1. [N900] disconnect dummy network
2. [N900-PC] disconnect the usb cable
3. [N900] genwall {route-usb} click stop button
4. [N900] genwall {route-gate} reset tmp resolv