You might want to try either DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958 from the first post. One of then should work, depending of your variant (001, 003, 005, 006) guessing yours is higher than variant 001 as that didnt work. So, try different variants first. Just not China ones
iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 20, device address 10. Device serial number is N/A Error claiming USB interface: Operation timed out Found device RM-696, hardware revision 1507 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 40551 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 20, device address 11. Device serial number is N/A Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1507 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003 Image moslo not present Image mmc not present Image tar skipped Image config skipped Charging battery, 10 % battery level (11 % required). Ctrl-c to exit Battery level 11 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [_] cert-sw [init 0 % 0 / 0 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure image [state progress transfer flash speed] --------------------------------------------------------------------- [f] cert-sw [init 0 % 1 / 1 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Progress bar initialization failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Downgrade disallowed (1355302068) [Pipe 0] Finishing in error state with status 10 ======================================== ERROR: Failed to flash images iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 20, device address 13. Device serial number is N/A Error claiming USB interface: Operation timed out Sending request 0x01 failed: Operation timed out NOLO_REQ_GET_STATUS: Operation timed out ERROR: Device status query failed iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 20, device address 15. Device serial number is N/A Error claiming USB interface: Operation timed out Found device RM-696, hardware revision 1507 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 41500 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 20, device address 16. Device serial number is N/A Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1507 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005 Image moslo not present Image mmc not present Image tar skipped Image config skipped Battery level 16 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [_] cert-sw [init 0 % 0 / 0 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure image [state progress transfer flash speed] --------------------------------------------------------------------- [f] cert-sw [init 0 % 1 / 1 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Progress bar initialization failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Downgrade disallowed (1355302068) [Pipe 0] Finishing in error state with status 10 ======================================== ERROR: Failed to flash images iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958_ARM.bin flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 20, device address 18. Device serial number is N/A Error claiming USB interface: Operation timed out Found device RM-696, hardware revision 1507 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 40321 kB/s) Suitable USB interface (phonet) not found, waiting... USB device found at bus 20, device address 19. Device serial number is N/A Raw data transfer EP found at EP2. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1507 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_006 Image moslo not present Image mmc not present Image tar skipped Image config skipped Battery level 15 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [_] cert-sw [init 0 % 0 / 0 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure image [state progress transfer flash speed] --------------------------------------------------------------------- [f] cert-sw [init 0 % 1 / 1 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Progress bar initialization failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Downgrade disallowed (1355302068) [Pipe 0] Finishing in error state with status 10 ========================================