This is the thread of different cards that have been succeeded with MMC boot, http://www.internettablettalk.com/fo...ad.php?t=16067

__________________________________________________ ____

Adata Turbo, 16G, succeeded after LLF, failed without LLF.
Adata Turbo, 8G, succeeded after LLF, failed without LLF.
Adata Turbo, 4G, succeeded without LLF
Adata 4G, micro in mini adaptor, succeeded without LLF

Dane-Elec, 4G, succeeded without LLF

Kingston 4G, micro in mini adaptor, succeeded without LLF

Patriot, class6, 16G succeeded without LLF (Dan)
Patriot, 8G, succeeded without LLF (nhanquy PM)

Sandisk???

Transcend class6, 8G, succeed without LLF (http://www.internettablettalk.com/fo...t=14637&page=2, #18; #22); worked for a while then die suddenly, suspect card problem, http://www.internettablettalk.com/fo...t=ghost&page=3, #21.
__________________________________________________ _____

The above are all SDHC. Any card bigger than 2G are SDHC? I used mostly Milhouse script. I did try the Wiki by enterring commands one by one,
http://maemo.org/community/wiki/howt...from_mmc_card/, no dice, same results, failed if no LLF. So far, 2G/Kingston and 1G/Adata have been straight clone, no LLF needed.

__________________________________________________ _______

I dont have the panasonic LLF in front of me. I remember flash erase on/off does not matter, as long as it is NOT the quick format, i.e., a format takes 10+ minute is the one you should use. I also checked the table above, PQI has not been reported. So, you would be the first one . You can do 1G or 2G MMC boot, you would be able to do 16G after the LLF. BTW, the LLF should give a successful format message, not error message. I did it on a windowPC running Vista.

Post back if question,

bun