These are my quick instructions for the iGo stowaway BT keyboard. (A compilation of someone else's and my edits). Use the second set of instructions first time.

Connect igo keyboard to N810
_____________________________

1. Open Control Panel on the N810

2. (Optional I think) Double click 'Bluetooth keyboard', select 'Generic 105-key PC' and OK

3. Back in Control Panel double click 'Bluetooth' under connectivity

4. Make sure 'Bluetooth on' and 'Visible' are checked

5. Click on Button 'Devices'

6. On the Igo keyboard hold down the left CNTRL KEY, the BLUE fn key and the GREEN fn key at the same time. (A GREEN LED above the T key will begin to flash).

7. Select the 'Think Outside Keyboard'

8. Select 'Edit'

9. Select 'Connect'

If it will not connect you need to reinitiate the pairing as follows:

1. Select the 'Think Outside Keyboard' and 'Delete' under Bluetooth devices. Confirm with 'OK'

2. On the Igo keyboard hold down the left CNTRL KEY, the BLUE fn key and the GREEN fn key

3. Select 'New' and the N810 will find the Think Outside Keyboard

4. Select 'OK' and note the four digit PASSCODE number. (Set as trusted should be checked)

5.Select 'OK'and immediately enter the PASSCODE number on the keyboard (hold BLUE Fn, enter number and press Enter)

The Keyboard will then be paired. Close Control panel.