[115259.640625] usb usb1: finish resume
[115259.640625] hub 1-0:1.0: hub_resume
[115259.664062] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[115259.820312] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[115259.882812] musb_h_ep0_irq 1100: no URB for end 0
[115259.945312] usb 1-1: new full speed USB device using musb_hdrc and address 23
[115260.078125] usb 1-1: skipped 13 descriptors after interface
[115260.078125] usb 1-1: skipped 2 descriptors after interface
[115260.078125] usb 1-1: skipped 1 descriptor after endpoint
[115260.078125] usb 1-1: skipped 2 descriptors after interface
[115260.078125] usb 1-1: skipped 1 descriptor after endpoint
[115260.078125] usb 1-1: skipped 2 descriptors after interface
[115260.078125] usb 1-1: skipped 1 descriptor after endpoint
[115260.078125] usb 1-1: skipped 1 descriptor after interface
[115260.078125] usb 1-1: default language 0x0409
[115260.078125] usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
[115260.078125] usb 1-1: Product: USB Audio
[115260.078125] usb 1-1: device v0c45 p1677 is not supported
[115260.078125] usb 1-1: uevent
[115260.078125] usb 1-1: usb_probe_device
[115260.078125] usb 1-1: configuration #1 chosen from 1 choice
[115260.078125] musb_g_ep0_irq 709: SETUP packet len 0 != 8 ?
[115260.078125] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00020103
[115260.250000] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115261.835937] EAC mode: play disabled, rec disabled
[115265.078125] usb 1-1: khubd timed out on ep0out len=0/0
[115265.078125] usb 1-1: can't set config #1, error -110[115265.078125] drivers/usb/core/inode.c: creating file '023'
[115265.078125] hub 1-0:1.0: 192mA power budget left
[115265.078125] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[115265.078125] hub 1-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
[115265.078125] usb 1-1: USB disconnect, address 23
[115265.078125] usb 1-1: unregistering device
[115265.078125] usb 1-1: usb_disable_device nuking all URBs
[115265.078125]  usbdev1.23_ep00: ep_device_release called for usbdev1.23_ep00
[115265.078125] usb 1-1: uevent
[115265.234375] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[115265.234375] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #2, port1 00000111
[115265.359375] usb 1-1: new full speed USB device using musb_hdrc and address 24
[115265.406250] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115266.359375] usb 1-1: khubd timed out on ep0in len=0/64
[115267.359375] usb 1-1: khubd timed out on ep0in len=0/64
[115268.359375] usb 1-1: khubd timed out on ep0in len=0/64
[115268.468750] usb 1-1: device descriptor read/64, error -110
[115273.578125] usb 1-1: khubd timed out on ep0in len=0/64
[115275.492187] EAC mode: play enabled, rec enabled
[115278.578125] usb 1-1: khubd timed out on ep0in len=0/64
[115281.093750] EAC mode: play disabled, rec disabled
[115283.273437] EAC mode: play enabled, rec enabled
[115283.578125] usb 1-1: khubd timed out on ep0in len=0/64
[115283.687500] usb 1-1: device descriptor read/64, error -110
[115283.796875] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00030111
[115283.859375] hub 1-0:1.0: port_wait_reset: err = -22
[115283.859375] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115283.968750] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115284.070312] hub 1-0:1.0: port_wait_reset: err = -22
[115284.070312] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.070312] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115284.250000] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115284.281250] hub 1-0:1.0: port_wait_reset: err = -22
[115284.281250] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.281250] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115284.460937] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115284.492187] hub 1-0:1.0: port_wait_reset: err = -22
[115284.492187] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.492187] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115284.671875] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115284.703125] hub 1-0:1.0: port_wait_reset: err = -22
[115284.703125] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.703125] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[115284.703125] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115284.765625] hub 1-0:1.0: port_wait_reset: err = -22
[115284.765625] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.882812] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115284.976562] hub 1-0:1.0: port_wait_reset: err = -22
[115284.976562] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115284.976562] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115285.156250] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115285.187500] hub 1-0:1.0: port_wait_reset: err = -22
[115285.187500] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115285.187500] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115285.367187] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115285.398437] hub 1-0:1.0: port_wait_reset: err = -22
[115285.398437] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115285.398437] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115285.578125] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115285.609375] hub 1-0:1.0: port_wait_reset: err = -22
[115285.609375] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115285.609375] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[115285.609375] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115285.671875] hub 1-0:1.0: port_wait_reset: err = -22
[115285.671875] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115285.789062] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115285.882812] hub 1-0:1.0: port_wait_reset: err = -22
[115285.882812] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115285.882812] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115286.062500] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115286.093750] hub 1-0:1.0: port_wait_reset: err = -22
[115286.093750] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115286.093750] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115286.273437] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115286.304687] hub 1-0:1.0: port_wait_reset: err = -22
[115286.304687] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115286.304687] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00130111
[115286.484375] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[115286.515625] hub 1-0:1.0: port_wait_reset: err = -22
[115286.515625] hub 1-0:1.0: port 1 not enabled, trying reset again...
[115286.515625] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[115286.515625] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[115286.515625] hub 1-0:1.0: reset change on port 1
[115286.515625] hub 1-0:1.0: port 1, status 0101, change 0013, 12 Mb/s
[115286.671875] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[115286.671875] musb_stage0_irq 570: VBUS_ERROR in a_host (91, <VBusValid), retry #1, port1 00000111
[115286.796875] usb 1-1: new full speed USB device using musb_hdrc and address 28
[115286.851562] musb_stage0_irq 646: CONNECT (a_host) devctl 5d