I made a DEB that will clone the currently running OS to a 2GB CARD. It will also clone it to bigger/smaller cards but its not really setup for that. 1GB 1: 64MB FAT 2: 872GB EXT2 (BOOT) 3: 64MB SWAP 2GB 1: 128MB FAT 2: 1.75GB EXT2 (BOOT) 3: 128MB SWAP 4GB 1: 256MB FAT 2: 3.5GB EXT2 (BOOT) 3: 256MB SWAP 6GB 1: 384MB FAT 2: 5.255GB EXT2 (BOOT) 3: 384MB SWAP 8GB 1: 512MB FAT 2: 6.6GB EXT2 (BOOT) 3: 512MB SWAP If things go smoothly with this, I will make some more DEB's with different layouts for different sizes. My initial build is only for N800 (either SD slot) or N810 IF YOU WANT TO CLONE TO THE INTERNAL 2GB CARD. This will not work on the n810 with a SD card. More work to follow. (SEE BELOW) for a link to the DEB if you want to try it out. NOTICE (It may HOSE your device and cause you to REFLASH your OS.) Use at own risk. Take backups of any important data before continuing. The new deb will partition your SD/MMC card, clone the Flash to the card. Install Boot Menu (with telnet support). Then you just reboot to your new menu and partition. This is really in testing phase, and I think the bugs are all out, but I want to have a few people test on other cards. So please (See Below) to test and please post your experiences out here... Thanks pb This will partition and format SD card This will clone currently running OS to SD card This will install bootmenu (with telnet recovery) This will fsck all EXT2 partitions on SD cards when booted to flash (plays wav when complete) (view log /tmp/fsck.txt) This will add sudo ALL=ALL in /etc/sudoers (gives you root access "sudo su -") Only on cloned partition not on flash TESTING USE AT OWN RISK -- This will remove ALL current data on you SD card -- -- This will remove ALL current data on you SD card -- -- This will remove ALL current data on you SD card -- -- This will remove ALL current data on you SD card -- AGAIN THIS IS FOR EITHER SLOT IN N800, AND ONLY WILL INSTALL TO INSTERNAL 2gb ON N810. iT WILL NOT CURRENTLY INSTALL TO N810 WITH A SD CARD. YOU WILL NEED 15MB FREE IN FLASH BEFORE INSTALLING. ONLY 1 SD CARD CAN BE INSERTED DURING INSTALL PROCESS. IF TWO ARE INSTALLED THE INSTALL WILL COMPLETE SUCCESSFULLY, BUT IT ACTUALLY FAILED. REMOVE THE DEB AND START AGAIN. IF YOU COMPLETE THE INSTALL AND THE CLONE WONT BOOT. BOOT BACK TO FLASH AND RUN IT A SECOND TIME (LET IT UPDATE) THIS SHOULD FIX IT. SOME CARDS SEEM TO NEED TO BE REBOOTED BEFORE BEING USEFULL AFTER PARTITIONING Go to penguinbait.com right click on "INSTALL TOOLS" "save target as" (SAVE FILE ON FLASH NOT ON SD CARD) Save the file somewhere, open application manager and select "install from file" from the menu. Select the file you just saved. Once the install completes, reboot for your new bootmenu and select your SD card on boot. PLEASE SEND ME LOG FROM APPLICATION MANAGER IF YOU GET A FAILURE Thanks everyone, especially Fanoush (As Usual) This deb steals all Fanoushes great work and packs it up with some scripting for my uses. If you would like to reinstall initfs with different options please see link below to Fanoush's home page http://fanoush.wz.cz/maemo/