Thread: Why there is lack of interest "Highspeed enabled kernel for the Nokia n800 and n810"?
View Single Post
brontide's Avatar
brontide is offline brontide
2008-07-14 , 02:22
Posts: 868 | Thanked: 474 times | Joined on Oct 2007 @ Capital District, NY, USA
#10
Here is my command session under Diablo. I have previously installed becomeroot and wget.

Code:
BusyBox v1.6.1 (2008-05-22 10:32:35 EEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.6.1 (2008-05-22 10:32:35 EEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # cd /media/mmc1
/media/mmc1 # wget http://intr.overt.org/4.2008.23-mmc-kernel/mmc-kernel-4.2008.23.bin
--22:16:01--  http://intr.overt.org/4.2008.23-mmc-kernel/mmc-kernel-4.2008.23.bin
           => `mmc-kernel-4.2008.23.bin'
Resolving intr.overt.org... 204.11.33.43
Connecting to intr.overt.org|204.11.33.43|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,536,904 (1.5M) [application/octet-stream]

100%[========================================================================================>] 1,536,904    254.00K/s    ETA 00:00

22:16:07 (258.18 KB/s) - `mmc-kernel-4.2008.23.bin' saved [1536904/1536904]

/media/mmc1 # fiasco-flasher -k mmc-kernel-4.2008.23.bin -f
Reading and flashing kernel image
Image(s) successfully flashed
/media/mmc1 #
Rebooted and things seem to work. I have not noticed any significant increase in mmc speed but dmesg clearly indicates that it's operating at 48000000Hz
 

The Following 8 Users Say Thank You to brontide For This Useful Post: