Thread: operation disabled due to low memory
View Single Post
Bundyo's Avatar
Bundyo is offline Bundyo
2008-08-13 , 07:31
Posts: 4,708 | Thanked: 4,649 times | Joined on Oct 2007 @ Bulgaria
#9
I encountered an interesting behavior in 30-2. As of today my browser crashes on start with the above message before closing. Reboot doesn't help. I can start it as root though.

When started as user with maemo-summoner instead of maemo-invoker, it spews out these two messages:

Code:
GLIB DEBUG default - g == 0x0 should do something about not being able to connect
GLIB CRITICAL ** default - LOW Mem: connection to server fail: exiting
then dies. I first saw that behavior, after loading an URL through dbus-send, but i don't believe that caused it. Everything else works normal.

My free memory is:

Code:
              total         used         free       shared      buffers
  Mem:       126648       122600         4048            0         4468
 Swap:       255992          148       255844
Total:       382640       122748       259892
And my free space is:

Code:
/dev/mmcblk0p1            4.0M      2.3M      1.7M  57% /mnt/initfs
none                    512.0k     92.0k    420.0k  18% /mnt/initfs/tmp
/dev/mmcblk0p1            3.0G      2.4G    428.1M  85% /
none                    512.0k     92.0k    420.0k  18% /tmp
none                      1.0M     68.0k    956.0k   7% /dev
tmpfs                     1.0M         0      1.0M   0% /dev/shm
/dev/mmcblk1p1            6.4G      6.3G     92.7M  99% /media/mmc1
/dev/mmcblk0p2            4.6G      4.2G    322.2M  93% /media/mmc2
So the problem may well be elsewhere. Someone encountered something similar?

EDIT: fsck doesn't seem to help either.
__________________
Technically, there are three determinate states the cat could be in: Alive, Dead, and Bloody Furious.
Last edited by Bundyo; 2008-08-13 at 08:04.