Here is some more

<7>musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
<7>musb_hdrc: MHDRC RTL version 1.400
<7>musb_hdrc: setup fifo_mode 4
<7>musb_hdrc: 29/31 max ep, 15424/16384 memory
<7>musb_hdrc: hw_ep 0shared, max 64
<7>musb_hdrc: hw_ep 1tx, max 512
<7>musb_hdrc: hw_ep 1rx, max 512
<7>musb_hdrc: hw_ep 2tx, max 512
<7>musb_hdrc: hw_ep 2rx, max 512
<7>musb_hdrc: hw_ep 3tx, max 512
<7>musb_hdrc: hw_ep 3rx, max 512
<7>musb_hdrc: hw_ep 4tx, max 512
<7>musb_hdrc: hw_ep 4rx, max 512
<7>musb_hdrc: hw_ep 5tx, max 512
<7>musb_hdrc: hw_ep 5rx, max 512
<7>musb_hdrc: hw_ep 6tx, max 512
<7>musb_hdrc: hw_ep 6rx, max 512
<7>musb_hdrc: hw_ep 7tx, max 512
<7>musb_hdrc: hw_ep 7rx, max 512
<7>musb_hdrc: hw_ep 8tx, max 512
<7>musb_hdrc: hw_ep 8rx, max 512
<7>musb_hdrc: hw_ep 9tx, max 512
<7>musb_hdrc: hw_ep 9rx, max 512
<7>musb_hdrc: hw_ep 10tx, max 512
<7>musb_hdrc: hw_ep 10rx, max 512
<7>musb_hdrc: hw_ep 11tx, max 512
<7>musb_hdrc: hw_ep 11rx, max 512
<7>musb_hdrc: hw_ep 12tx, max 512
<7>musb_hdrc: hw_ep 12rx, max 512
<7>musb_hdrc: hw_ep 13tx, max 512
<7>musb_hdrc: hw_ep 13rx, max 512
<7>musb_hdrc: hw_ep 14shared, max 1024
<7>musb_hdrc: hw_ep 15shared, max 1024
<6>musb_hdrc: USB OTG mode controller at c8808000 using DMA, IRQ 218
<6>Bluetooth: Core ver 2.13
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>NET: Registered protocol family 2
<7>Switched to high resolution mode on CPU 0
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>ashmem: initialized
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<6>msgmni has been set to 245
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered (default)
<6>omapfb: ls041y3 rev 8f LCD detected
<6>omapfb: configured for panel ls041y3
<6>omapfb: DISPC version 2.0 initialized
<6>omapfb: RFBI version 1.0 initialized
<6>omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
<6>omapfb omapfb: s1d1374x: setting update mode to auto
<6>omapfb: Framebuffer initialized. Total vram 2310144 planes 3
<6>omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
<6>omap_rng omap_rng: OMAP Random Number Generator ver. 40
<6>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x4806e000 (irq = 74) is a ST16654
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>Linux video capture interface: v2.00
<6>Retu power button driver initialized
<6>retu: Registering interrupt 0 for device PwrOnX
<6>input: retu-pwrbutton as /class/input/input0
<6>retu: Registering interrupt 2 for device RTCS
<6>retu: Registering interrupt 5 for device RTCA
<6>Retu watchdog driver initialized
<6>Retu/Vilma headset driver initializing
<6>menelaus 1-0072: Menelaus rev 2.2
<6>dsp dsp: OMAP DSP driver initialization
<4>Driver 'sd' needs updating - please use bus_type methods
<6>OneNAND driver initializing
<6>omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base c88c0000
<7>OneNAND Manufacturer: Samsung (0xec)
<6>Muxed OneNAND(DDP) 256MB 1.8V 16-bit (0x48)
<6>OneNAND version = 0x0011
<7>Chip support all block unlock
<3>onenand_wait: controller error! state 5 ctrl 0x0440 intr 0x8000
<6>Scanning device for bad blocks
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1084 at 0x08780000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1515 at 0x0bd60000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1699 at 0x0d460000
<6>onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400
<4>Bad eraseblock 1759 at 0x0dbe0000
<5>Creating 5 MTD partitions on "omap2-onenand":
<5>0x00000000-0x00020000 : "bootloader"
<5>0x00020000-0x00080000 : "config"
<5>0x00080000-0x00280000 : "kernel"
<5>0x00280000-0x00680000 : "initfs"
<5>0x00680000-0x10000000 : "rootfs"
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
<6>android adb driver
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<4>drivers/usb/musb/tusb6010.c musb_platform_enable: dma not reactivated
<6>TSC2005 driver initializing
<6>OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec
<6>hci_h4p hci_h4p: Registering HCI H4P device
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu