View Single Post
Posts: 16 | Thanked: 1 time | Joined on Jun 2007
#97
Here is the rest

<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (keypad) at GP timer 10/9
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>Registered led device: keypad
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
<6>ASoC version 0.13.2
<6>ALSA device list:
<6> No soundcards found.
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.11
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.10
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Power Management for OMAP2 initializing
<6>PRCM revision 1.0
<6>Disabling unused clock "uart2_fck"
<6>Disabling unused clock "uart2_ick"
<6>Disabling unused clock "gpt12_fck"
<6>Disabling unused clock "gpt12_ick"
<6>Disabling unused clock "gpt11_fck"
<6>Disabling unused clock "gpt11_ick"
<6>Disabling unused clock "gpt8_fck"
<6>Disabling unused clock "gpt8_ick"
<6>Disabling unused clock "gpt7_fck"
<6>Disabling unused clock "gpt7_ick"
<6>Disabling unused clock "gpt6_fck"
<6>Disabling unused clock "gpt6_ick"
<6>Disabling unused clock "gpt5_fck"
<6>Disabling unused clock "gpt5_ick"
<6>Disabling unused clock "gpt4_fck"
<6>Disabling unused clock "gpt4_ick"
<6>Disabling unused clock "gpt3_fck"
<6>Disabling unused clock "gpt3_ick"
<6>Disabling unused clock "gpt2_fck"
<6>Disabling unused clock "gpt2_ick"
<6>Disabling unused clock "dss2_fck"
<6>Bootup reason: charger
<6>OMAP GPIO switch handler initializing
<6>headphone (GPIO 107) is now disconnected
<6>cam_turn (GPIO 12) is now inactive
<6>cam_act (GPIO 95) is now inactive
<6>bat_cover (GPIO 110) is now closed
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Waiting for root device /dev/mmcblk0p3...
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new SD card at address b368
<6>mmcblk0: mmc0:b368 SDC 3.83 GiB
<6> mmcblk0: p1 p3
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD8)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD5)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD55)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<3>mmci-omap mmci-omap.0: command timeout (CMD1)
<6>EXT3-fs: INFO: recovery required on readonly filesystem.
<6>EXT3-fs: write access will be enabled during recovery.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>Freeing init memory: 124K
<4>Warning: unable to open an initial console.
<6>EXT3 FS on mmcblk0p3, internal journal
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<6>warning: `app_process' uses 32-bit capabilities (legacy support in use)
# jacksonr@SpinDizzy:~/Documents/nokia$


Hopefully this helps
By the way, I really appreciate the work that you have done solca
very fine work!