# cat /proc/bus/input/*            
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="retu-pwrbutton"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="Internal keypad"
P: Phys=spi1.0/input-kp
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: EV=3
B: KEY=1680 7 c0000000 10000002

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="TSC2301 touchscreen"
P: Phys=spi1.0/input-ts
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2 
B: EV=b
B: KEY=0
B: ABS=1000003

N: Number=0 Name=kbd
N: Number=1 Name=evdev Minor=64

<6>[    2.454162] omapfb: ls041y3 rev 8f LCD detected
<6>[    2.454620] omapfb: configured for panel ls041y3
<6>[    2.468536] omapfb: DISPC version 2.0 initialized
<6>[    2.468749] omapfb: RFBI version 1.0 initialized
<6>[    2.489288] omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
<6>[    2.489532] omapfb omapfb: s1d1374x: setting update mode to auto