To everyone who purchased a Stainless Steel case and the SD adapter

If you get any scratches on it like you did with the original N810 cover they can be remover.

Purchase a 150 to 220 grit soft foam sanding block from some where like home Depot ( not "paper" sand paper, the foam kind).
Remove the case from the Nokia Tablet and place it on a old cloth folded to help protect the clips. You do not want to put too much pressure on the clips while doing this.
Rub the Stainless Steel cover with the soft sanding block straight up and straight down. If you rub with the grain of the steel the scratches will be removed. Use a cleaner to remove the dark color left over. This is easy to clean off and you may not notice it at first. You can also use a mild stainless steel cleaner to remove this residue but always rub with the grain.

The cover should look as good as new. Never rub across the grain ( the long way).

Never do this with the black units. I also removed some minor scratches on the original Nokia N810 battery cover but you should be very careful not to rub too hard if you decide to do this. Test a small corner first.

Thanks again for purchasing my mod kit.