[General]

# List of plugins that should not be loaded on bluetoothd startup
DisablePlugins = network,input,hal

# Default adaper name
# %h - substituted for hostname
# %d - substituted for adapter id
Name = Nokia N900

# Default device class. Only the major and minor device class bits are
# considered.
Class = 0x00020c

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
DiscoverableTimeout = 0

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
PairableTimeout = 0

# Use some other page timeout than the controller default one
# which is 16384 (10 seconds).
PageTimeout = 8192

# Discover scheduler interval used in Adapter.DiscoverDevices
# The value is in seconds. Defaults is 0 to use controller scheduler.
DiscoverSchedulerInterval = 0

# What value should be assumed for the adapter Powered property when
# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
InitiallyPowered = false

# Remember the previously stored Powered state when initializing adapters
RememberPowered = true

# Use vendor, product and version information for DID profile support.
# The values are separated by ":" and VID, PID and version.
#DeviceID = 1234:5678:abcd

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to true.
ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
NameResolving = true