Thread: Stock kernel and NAT support
View Single Post
wek is offline wek
2010-02-19 , 07:06
Posts: 13 | Thanked: 11 times | Joined on Jan 2010
#28
Originally Posted by qole View Post
Tried a few more times. N900 didn't reboot, but the whole thing was terribly, terribly slow and not very stable-feeling.

Corrected my instructions; I had the order of 1 and 3 wrong. First you set up wlan0, then you set up the router.

wek: How do I run the VDE apps as daemons?
In case of slirpvde use -d for a daemon (surprise ;-) ). The
others are probably similar.
With -p you can create a pidfile which you should use in
your up/down-script to clean up properly.
The reliability-problem could be due to various reasons.
Have you set the wlan0-ip to 0.0.0.0?
If you use wireshark (tcpdump or any other sniffer) on the
box connected via our hotspot which mac for 10.0.2.2 do
you see? The same you get when you do ifconfig wlan0
on the N900?
Try with pan as an alternative to see if it has to to with
ad-hoc on N900 in principle. v(Would probably anyway
more suitable because of power-consumption on the
long - aeh more short ;-) - run.)