OS

1. Windows xp > cmd
2. USB attached to computer
3. "u"-key + attached micro-usb to N900
--> N900 boots to flash mode (screen with little usb-icon in upper right)
4. started flasher with fiasco/firmware image
5. flasher finds phone and uploads it
6. flasher exits back to prompt
7. N900 boots and asks my pin code
8. (windows finds device as mass storage here)
9. I shut down N900, long press power button
10. Remove micro usb from n900

eMMC

1. Windows xp > cmd
2. USB attached to computer
3. "u"-key + attached micro-usb to N900
--> N900 boots to flash mode (screen with little usb-icon in upper right)
4. started flasher with eMMC image
5. flasher finds phone

Here Is The Error,

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.

See How It Boots It Into Flash Mode Then Loses Connection.!

Anthony- Curtis