View Single Post
Posts: 716 | Thanked: 303 times | Joined on Sep 2009 @ Sheffield, UK
#1467
Anyone know what this is all about in dmesg?
Code:
[  210.907440] WARNING: at /home/builder1/maemo-fremantle-armel-extras-devel/work/kernel-maemo-2.6.28/arch/arm/mach-omap2/clock34xx.c:443 omap3_noncore_dpll_set_rate+0x28c/0x2dc()                                                                                                                                                                 
[  210.907470] Modules linked in: vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap omaplfb pvrsrvkm bridgedriver g_file_storage ipv6 uinput board_rx51_camera omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech mousedev smc91x mii wl12xx omap_wdt omap_ssi mmc_block mac80211 crc7 tsc2005 omap_hsmmc nokia_av mmc_core hci_h4p bluetooth et8ek8 fmtx_si4713 videodev lis302dl ad5820 v4l1_compat compat_ioctl32 adp1653 leds_lp5523 tsl2563 smia_sensor smiaregs v4l2_int_device rtc_twl4030 rtc_core twl4030_wdt leds_twl4030_vibra led_class joydev                                
[  210.907623] [<c0030470>] (dump_stack+0x0/0x14) from [<c0056e14>] (warn_on_slowpath+0x4c/0x68)                                                                          
[  210.907684] [<c0056dc8>] (warn_on_slowpath+0x0/0x68) from [<c003da9c>] (omap3_noncore_dpll_set_rate+0x28c/0x2dc)                                                       
[  210.907714]  r6:c038833c r5:60000113 r4:c038d2ec                                                                                                                       
[  210.907714] [<c003d810>] (omap3_noncore_dpll_set_rate+0x0/0x2dc) from [<c0035a48>] (omap2_clk_set_rate+0x20/0x24)                                                      
[  210.907745] [<c0035a28>] (omap2_clk_set_rate+0x0/0x24) from [<c0041214>] (clk_set_rate+0x98/0x118)                                                                     
[  210.907775] [<c004117c>] (clk_set_rate+0x0/0x118) from [<c003deb0>] (program_opp+0xd0/0x18c)                                                                           
[  210.907775]  r7:00000008 r6:00000000 r5:00000040 r4:c03b29c0                                                                                                           
[  210.907806] [<c003dde0>] (program_opp+0x0/0x18c) from [<c003e06c>] (resource_set_opp_level+0x100/0x170)                                                                
[  210.907836] [<c003df6c>] (resource_set_opp_level+0x0/0x170) from [<c003e120>] (set_opp+0x44/0xb4)                                                                      
[  210.907836]  r8:c038d5bc r7:c038d790 r6:00000008 r5:c03b29c0 r4:00000008                                                                                               
[  210.907867] [<c003e0dc>] (set_opp+0x0/0xb4) from [<c0049a64>] (update_resource_level+0x5c/0x80)                                                                        
[  210.907897]  r5:c03b29d0 r4:c038d574                                                                                                                                   
[  210.907897] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)                                                      
[  210.907928]  r7:c038d790 r6:00000008 r5:c03b29d0 r4:c038d574                                                                                                           
[  210.907928] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c003ddb8>] (set_freq+0x98/0xc0)                                                                    
[  210.907958]  r7:c038d790 r6:c038d718 r5:2faf0800 r4:c0334656
[  210.907958] [<c003dd20>] (set_freq+0x0/0xc0) from [<c0049a64>] (update_resource_level+0x5c/0x80)
[  210.907989]  r9:c03aad54 r8:cf18b300 r7:c0390588 r6:2faf0800 r5:c03b36c8
[  210.908020] r4:c038d5bc
[  210.908020] [<c0049a08>] (update_resource_level+0x0/0x80) from [<c0049d84>] (resource_request_locked+0x144/0x15c)
[  210.908050]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c038d5bc
[  210.908050] [<c0049c40>] (resource_request_locked+0x0/0x15c) from [<c0049dd0>] (resource_request+0x34/0x4c)
[  210.908081]  r7:c0390588 r6:2faf0800 r5:c03b36c8 r4:c0334656
[  210.908081] [<c0049d9c>] (resource_request+0x0/0x4c) from [<c0049624>] (omap_pm_cpu_set_freq+0x34/0x44)
[  210.908111]  r7:000ba4a3 r6:c038d718 r5:2faf0800 r4:00000009
[  210.908142] [<c00495f0>] (omap_pm_cpu_set_freq+0x0/0x44) from [<c0048494>] (omap_target+0x60/0x78)
[  210.908142] [<c0048434>] (omap_target+0x0/0x78) from [<c0205b04>] (__cpufreq_driver_target+0x30/0x40)
[  210.908172]  r7:00000000 r6:000dbba0 r5:0000fedf r4:c03aad54
[  210.908203] [<c0205ad4>] (__cpufreq_driver_target+0x0/0x40) from [<c02084d4>] (do_dbs_timer+0x270/0x2d8)
[  210.908233] [<c0208264>] (do_dbs_timer+0x0/0x2d8) from [<c006907c>] (run_workqueue+0xd4/0x198)
[  210.908233] [<c0068fa8>] (run_workqueue+0x0/0x198) from [<c0069e1c>] (worker_thread+0xf0/0x104)
[  210.908264]  r9:00000000 r8:00000000 r7:cf10ab00 r6:cf1b8000 r5:cf0f8d00
[  210.908294] r4:cf1b9fb8
[  210.908294] [<c0069d2c>] (worker_thread+0x0/0x104) from [<c006d0a0>] (kthread+0x54/0x80)
[  210.908325]  r7:00000000 r6:00000000 r5:c0069d2c r4:cf10ab00
[  210.908325] [<c006d04c>] (kthread+0x0/0x80) from [<c0059fac>] (do_exit+0x0/0x7a8)
[  210.908355]  r5:00000000 r4:00000000
[  210.908355] ---[ end trace 3325061d8a0754d0 ]---
Am I having overclocking problems or is this something else? I haven't noticed any problems at all overclocked, just happened to check dmesg out of curiosity.
__________________
http://www.speedtest.net/result/877713446.png

My Websites
CSD Projects - Flickr - UAE4Maemo (UAE4All Compatibility List)

Favourite N900 Applications
Picodrive - UAE4All

Please post your UAE4All compatibility reports. Even better, post them to my UAE4Maemo site!
Not sure how UAE4All works such as mouse emulation? Read the FAQ.