It sounds like you only reflashed the firmware not emmc. If you want to do that just follow this instructions: Download the Vanilla eMMC image (.bin file) from here: http://tablets-dev.nokia.com/nokia_N900.php “RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin” Then do this: The first few steps are identical to the way you would flash the firmware. * Open the Command Prompt by going to Start then Run and type cmd, then press Enter. * Change directory to the flasher’s program path by entering: cd "C:\ProgramFiles\maemo\flasher-3.5" * Connect the USB cable while holding the ‘u’ key on the N900. Within an instant you will see a USB icon on the top right corner of the N900. Now leave the ‘u’ key. * Execute the following command: flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R (the same here one code line) and that should do the trick for you The emmc is your 32gb masstorage.