Thread: Overclock the N900?
View Single Post
gabby131 is offline gabby131
2010-05-10 , 11:27
Posts: 1,729 | Thanked: 388 times | Joined on Jan 2010 @ Canada
#3540
Originally Posted by CarstenDutch View Post
I had this problem too, just make it 600:35,430 to make it run. with 600:34,430 i had artifacts and litle bit of hickup sometimes in video.
I'am still testing this setup with other frequencies too. and look at video's for artifacts and then test every frequency on locked speed.

I believe that the starving config is not realy wel suited for most! there must be something related too the 599/600 change with the maemo27 kernel i needed too move up the voltage for the cpu600/430dsp range.
i read on a thread (i think it was the "saving battery, undervoltage kernels") that the developer of the starving itself stated that there is no guarantee for the starving kernel to work to all devices.

i am aware of it since i read it, but still want to try when its available.

unfortunately, no luck, im sticking with low voltages of titan.

thanks to titan

EDIT: i can chhoose to tweak the settings but i chose not to, i want the kernels the way they are when i installed them, and based on past my experience touching the pmconfig. by usig the ulv and ideal kernels @1ghz, my device has less time producing heat. and only up to 25°c (its a bit cold here, thats why its low) even if using game emus.
__________________
if i did help you, just click "Thanks" on the lower right of my post. thanks!

"The best way to break a Spell is to prevent it from being cast in the first place"

N900: 1000/1150mhz; sampling_rate 15; up_threshold 150000;
Last edited by gabby131; 2010-05-10 at 11:32.