Thread: Automatic choosing best frequency for FM Transmistter?
View Single Post
imax is offline imax
2010-05-13 , 21:46
Posts: 6 | Thanked: 7 times | Joined on Feb 2010
#24
Originally Posted by pantera1989 View Post
You don't need the FM transmitter to be actually enabled for this to work. You just need N900 in built FM module to scan the frequencies and then edit whatever it has to edit so that the FM transmitter is set to that frequency. I'm sure that info is saved somewhere since the transmitter loads to the previous frequency set.
agreed the scanning part will work without the transmitter being enabled, but if the op is wanting to travel round with the transmitter automatically selecting the best frequency, unless the headphone override on the transmitter can be turned off, you'll need to keep plugging in and disconnecting the headphones.

still can't see how the car radio would be retuned. AFAIK, the auto retune works by selecting the strongest signal within a predefined range for a specific station, once a previously free frequency was no longer suitable, a significant change in frequency would be needed, which falls outside the use of auto frequency functions.